|
|
|
Model Shipways Sultana Colonial Schooner Build Log |
Page Navigation
 |
November 8, 2006 |
As usual, not taking my time to make quality pictures, but here is my
progress so far. I keep reminding myself that this is a hobby right? Everybody enjoy—thanks for tuning in.
ps. I am going to completely redo that front piece—its "u g l y !!!" and its also for those to laugh at.
Hey I know its funny looking. Just need to bring it back into the ship yard for some more work! On a serious note, I am realy not happy
with the wood that was used to make that stempost and that cut out for the figure head. The wood kept on cracking and would not do what
I want it to do. It seems that the wood supplied should have been much harder wood. But at anyrate, I am going to cut that off and maybe
go by some harder wood that I can fashion better.
 |
Wales, Rubbing Strakes, and Channels
|
 |
Wales, Rubbing Strakes, and Channels
|
 |
Wales, Rubbing Strakes, and Channels
|
 |
Wales, Rubbing Strakes, and Channels
|
 |
Wales, Rubbing Strakes, and Channels
|
|
|
November 13, 2006 |
Well, I just could not let that poor stem alone as it looked horrid.
I cut off the stem near the hull and completely rebuild it. I think it looks better and I like it better. I must say to myself that if
I took more time at this, I think I could produce a better model. I was looking at some ships last night at some mighty fine craftsmanship
and it encouraged me to put forth more effort. I guess I am spoiled by the plastic version in which everything is pre molded and just glue
the part in place. To me it was all about making that plastic part "look better" with aging and weathering techniques that I enjoy.
However, again with Wood, "you" are the captain of how it is going to turn out. You are in complete control of that "strip"
of wood and how it is to be cut and fashioned. Yes, there is an "art" to this !
Enjoy the pics.
ps. Those pictures don´t lie about the touch up work that needs to be done. It is amazingly upsetting how the camera picks up on blemishes
that you didn´t think are there!
 |
Rebuilding Stem Piece, and Touchups
|
 |
Rebuilding Stem Piece, and Touchups
|
 |
Rebuilding Stem Piece, and Touchups
|
|
|
November 17, 2006 |
Some more progress (building that is).
 |
Rail Stanchions, Ladders, and Gratings
|
 |
Rail Stanchions, Ladders, and Gratings
|
|
|
November 23, 2006 |
Bear with me on my "still" lack of good nautical knowledge.
The fore and aft Hatches and the one with the ladder are from the kit (the metal ones). I just used the Model Shipways paint that I ordered
with the kit to paint them with. I used the yellow and the red and black. This is what I did. The first thing I grabbed was the Black and
I painted the whole hatch with black so that the black would fill in the tiny holes in the grating. I waited for about 1 minute and took a
small hand towel and rubbed the black off of the hatch and what happened is that the black was still "filled" in the hatch holes.
Basically I used a lot of black paint to completely fill in the holes so that when I wiped across the hatch all of the black paint would be
removed except for the very top surface of the hatch. The rest of this I just painted very carefully the hatch gratings with the yellow and
trimmed in Red. This technique was done for the fore and aft hatches.
Now the midship hatch, I did not like the one supplied for only one reason. I could not get the raised individual hatch ring hoops to be
painted. I went ahead and made the midship hatch from scratch with the individual hatch plank covers. I then went to a local Hobby Lobby
in the jewelery department and they had what is called "eye pins" and "jump rings". The eye pins were 2¨ long so I had
to cut just about all of that length off. I then hammered the eye pin into the hatch plank until a small "arch" was visible. I just
did it this way only because that is what I choose to do. No reference materials. I am not sure if I am going to add those hoop rings to the
top of those arches or not. I would have to scratch make those as the purchased "jump rings" are little too big.
I then have some "Glaze" paint that I can not remember what the brand is. I am not at my home computer right now as I am out of town
visiting other family members. The Glaze was used on all of the hatches and as a matter of fact on the whole ship. This glaze is nice as it
leaves a very mild finish and can be applied in multiple coats to achieve the results that you like. One thing that I like about this glaze
is that the more you put, the darker and richer the wood or paint finish gets.
Ok the Glaze name on the bottle actually just says "Glaze" and again I am not at my work bench so this is all I know. If I had to
make a guess right now, it would be a Floquil or Model Masters type.
I dread building the rails for the stem, cheek knees and such, this is going to be tough. I think what makes it tough is the fact that it
points back to the directions and plans that MS gives us. I really feel for those that got this model and I know that they must be having
a hard time. Now this is just my humble opinion. I think that MS needs to seriously revisit this ship and offer MUCH more laser cuts parts.
I say that this would be very good for the beginner. This model expect too much scratch building for a beginner. I am sorry—just my
opinion. I would not mind paying a little more like $125 if they would have included more lazer cut parts to help along with the assembly.
I think about myself and the ones that are coming from the plastic world. I think that people that are coming from Plastic into wood,
still have a since of putting parts together. The first wood modeler does not need to get deeply involved in trying to build out cheek knees
and extensive railings on their first Model. What I mean by first Model is Model Expo claiming that this is a good first ship to build.
I might right them a encouraging letter to the effect. I like Model Expo and order from them frequently and I plan to buy the Phantom when
all of this is over. I also have a Bluenose II that I bought like many many years ago that I need to finish. But you know that the entire
windlass and other parts are all lazer cut. Anyway, sorry for the side bar of ranting. I am not upset nor mad, I just hate to see a first
inspired modeler to get discouraged if they seem to have problems. After all, this is one of the main reasons I wanted to to this website,
because I knew that I might have problems and if I have problems with it, then I know that someone else "out there" would have similar
problems. We can all build this ship together and be proud of "your" finished product. So, if those of you that are getting
discouraged, please don´t but get that ship out and go at it again and lets do it!
Thanks for listening to my long talk this morning!!
|
|
December 10, 2006 |
The latest
 |
Bitts, Catheads, Timberheads, Bowsprit, and Windlass
|
 |
Bitts, Catheads, Timberheads, Bowsprit, and Windlass
|
|
|
December 18, 2006 |
I have been very frustratingly busy at making the rails at front of ship.
I took my ideas off of the actual Sultana at the Sultana site. I am not necessarily 100% happy with it, but no one will know unless someone
critiques it here. Overall, I guess I am somewhat happy with my results.
I will post pictures maybe tomorrow. This ship has been a challenge. I am almost finished with the deck and will move on to the
masting—rigging this coming week.
|
|
December 20, 2006 |
A lot of work done here.
 |
Armament
|
 |
Close up of Deck Details
|
 |
Close up of Deck Details
|
 |
Stem, and Head Details
|
 |
Mid Ships Details
|
 |
Full View
|
|
|
December 21, 2006 |
I just used the plain ole Model Shipways paint for everything (even
though it is totally aggravating!). I just dab it on until it is covered on the Guns. I used testors (Gold) for the Gun handles and mounting
brackets. Why did I do this? Don´t know, just lile the "flare" of things I guess. I wanted to the guns to have more of an ornamental
look to them. I know that from a reality stand point, they are not even close to being accurate, but I think it adds. Just my thoughts.
And hey, didn´t someone say that we are allowed to decorate it the way we wish???
The glossy—ness of the ship does not look that glossy. The camera and the lightning just makes it look too glossy. I really like
Chucks ship and I am not sure how he got that smooth natural look. I thought I would never get the front railings done and the figurehead
and all to look like I want. I am really not too pleased with it, but hey, its ok with me I guess. I took that idea as close as I could from
the Sultana Project website. The Figure head again, just using the white Model shipways paint. I did not gloss the figure head.
About that Model shipways paint, well, it´s ok. I don´t know what the deal is with that paint, but it seems too thick. I must be
missing something about how to use it. But, I am always adding a little water to it so that it will paint smooth. It has to be babied alot to
get it to do right. I have to use alot of coats over and over and this also takes away from the natural beauty of the ship. I bet I have about
6 coats of white paint on the bottom hull, and I can still see the gray primer that I put on. Again, I must be missing something or
Model Shipways needs to come up with a better paint. I ordered some stain from them and I love the stain. I used the stain on the bowsprit
mast that is in construction.
Thanks for your compliments—it makes me more interested in the project and keeps me from getting burned out. I started this back in
June of 2006 and I am just now almost getting the Hull completed. The timbers need to be cut down I know this. I am getting a new dremel
tool with cutting attachments that can do this for me. Other than this, the only tools that I have used on this ship is a couple of files,
and xacto knife, and a set of dividers for measuring.
The metal alligator clips have really come in handy.
|
|
December 27, 2006 |
I have started on constructing my Mast. I cheated (again). I needed to
"taper" my mast—so I used a small drill press that I have. I mounted my dowel in the press and turn on the drill press.
With a piece of sandpaper, all I did was run the sand paper up and down the dowel until I achieved my taper. It took about 5 minutes or
so to do this to the level of satisfaction of my liking. Oh well to each there own (I can here it now). But hey—got my mast done!
I also used a very small disk sander to make the upper head end of the mast. The only thing I did by hand was that at the lower end of the
mast that inserts into the ships deck, I used a file to file off that Octagon shaped area.
When I get one mast done I shall submit the photo on that one too.
|
|
January 14, 2007 |
Got started on my Chain Plates. Got to get those timber head cut
down—they are too high
 |
Chainplates
|
|
Chainplates
|
|
|
|
|
