Roter Löwe 1597 by Ondras71 - scala 1/60

Great methods - many thanks for sharing with us your working steps :cool:
Thank you, Uwek. I have already said that I would like to find useful instructions myself, which is why I am attaching them myself.;)

Drilled holes for hinge hooks. The blankets of the shooting ranges are kept, I will place them at the end of the construction..

dirky na panty střílen.JPG

And I used the week of incapacity for work to progress in the construction.. :oops: Previously prepared gratings for the aft deck were shaped..

rošty zadní paluby (1).JPG

rošty zadní paluby (3).JPG

rošty zadní paluby (4).JPG

And according to them, deck beams are created..

lepení palubníků a kolen (5).JPG

zkouška prostupu roštěm.JPG

And added previously prepared knees..

lepení palubníků a kolen (3).JPG

lepení palubníků a kolen (4).JPG

lepení palubníků a kolen (2).JPG

And now I have to fill the lower deck and close the deck..Explosion
 
From the beginning, I thought he would hardly see under the aft deck. Despite the wide grating, there will be a lot to see there. That's why I decided to supplement the knee padding. I didn't like the first attempt with colored dots ..

svorníky barvou...JPG

It forced me to drill and place metal..:eek:

svorníky pod zadní palubou (1).JPG

navoskované zadní podpalubí.JPG

I add underdecks, cannonball boxes..

P4220051.JPG

P4240075.JPG

The Dutch double deck also has them on the open deck..

P4240082.JPG

I also think about stone balls of the right caliber..Sleep

P4220059.JPG

P4240069.JPG

And Capstan production. Simplified under deck..

P4190041.JPG

P4240092.JPG
 
Very good work my friend - a good decision to make the hanging knees with different bolting.
Are you sure, that these boxes were for canonballs?
On the drawing visible on one photo, it is looking not round and in addition the balls would be very heavy to be installed hanging at the wall.
If I had to store some balls near the guns, I would store them on the floor.....
 
Very good work my friend - a good decision to make the hanging knees with different bolting.
Are you sure, that these boxes were for canonballs?
On the drawing visible on one photo, it is looking not round and in addition the balls would be very heavy to be installed hanging at the wall.
If I had to store some balls near the guns, I would store them on the floor.....
Thanks Uwek. The boxes may not be for cannonballs, but apparently for some equipment, I'm studying. Ab Hoving would definitely answer us ..
Thank you for the like!:)

The lower capstan is glued..

lepení spodního vratidla.JPG

I finished the upper capstan and added a rope pulley to the Halyard knighthead post against the plan Main top rope..

vratidlo a dodělaná kladnice (1).JPG

vratidlo a dodělaná kladnice (2).JPG

Before gluing the deck beams, I adjusted the visible places at the holes on them, the grating do not have a scale force..

zvýšení trámů pod gratingy (1).JPG

zvýšení trámů pod gratingy (2).JPG

I also create Large staghorn and Kevel blocks, these are completed according to Zehaen's plan..

úvazové sloupky.JPG

Rear grating shaped ..

zúžení horních gratingů (3).JPG

hotové zadní gratingy.JPG
 
Beautiful work Ondras! The cannon barrels are superb. What armament did she carry on the main deck - 8 pounders and ?
 
Thank you for the like! Thumbsup

I finished the cannon barrels on the upper deck. They have been ready for 2.5 years..o_O

View attachment 307748

View attachment 307749

View attachment 307752


View attachment 307750



View attachment 307753

I placed Large staghorn and Level blocks on the main deck..

View attachment 307745

View attachment 307746

View attachment 307747
Dear Ondras
When my friends ask me what I want to be when I grow up, I answer to them that I want to be an expert in building models of ships at your level and in the range of capabilities you display. Hopefully one day I will get closer to that, just amazing work
 
Beautiful work Ondras! The cannon barrels are superb. What armament did she carry on the main deck - 8 pounders and ?
Greetings to Heinrich. There are few details about this reproduction of the ship ..


My barrels have a caliber of 1.4 mm, which is 8.4 cm in realism, which corresponds to a 4-pound cannon. It's alright.. Sleep

I measured Dutch artillery trucks..

vyměření horních děl (2).JPG

vyměření horních děl (3).JPG

Production of artillery trucks..

bočnice lafet (1).JPG

osy kol.JPG

kola  (1).JPG

kola  (2).JPG

Artillery trucks folded ..

složená lafeta (1).JPG

složená lafeta (2).JPG

složená lafeta (3).JPG

Ready material for ropewalk..

materiál na splétačku lan.JPG
 
Your guns are fitting very well into the gunports - very good work
I am looking forward to see the carriages finished
 
Dear Ondras
The cannon carts look great, I loved the idea of the holes in the wheels,
I really enjoy and learn from following your most impressive work
Thank you very much Shota. Most of the art is peeked from the experts on model forums.Gold Star

After a week's sick leave, I finally completed my ropewalk. I only bought the Czech "Merkur" set with wheels and a motor, the others are various remains, the other side is still driven by a cordless drill .. It works.. Thumbsup

díly na ropewalk.JPG



převody Merkur.JPG

výroba kuželu (1).JPG

výroba kuželu (3).JPG

připravený ropewalk (1).JPG

připravený ropewalk (2).JPG

After a short training "IT" really creates ropes !! So far, I'm training on the remnants of threads..Explosion.. Explosion

první lanka 3x2 a 3x3.JPG
 
Last edited:
I'm learning to work with a ropewalk. It's really about testing. Catch weight weights and skill.. The first ropes and anchor cable Gutermann .. Explosion

hotová lana Gutermann (3).JPG

First I have to create ropes for the cannons, which will already be placed under the aft deck..

hotová lana Gutermann (1).JPG

hotová lana Gutermann (2).JPG

I study in detail and only now do I understand that the "rope" is braided only once from 3x32 threads .. Then the anchor "cable" is braided from three prepared ropes..o_O
After the first twisted ropes, I confirmed that the Dutch ships had, against the English, all the ropes turned to transport, even stays. This is confirmed in publications by Ab Hoving, such as "The Ships of Abel Tasman" and on replicas of Batavia and Duyfken..
So I used the table of the Czech modeler marsalva, to whom I would like to thank very much for the information, because the system dropped my trial and I don't have to invent the invented ones, For a 3x1 rope, which is braided from three clockwise threads, the threads must first be turned to the left, elongated by 3.6 percent and then pre-spun to the left to form a clockwise thread.
During this, I ran the threads several times between my fingers and the resulting cable, which is more hairy, went through the flame of the candle and the resulting cable P 3x1 with a thickness of 0.37 mm is great !!Explosion

hotová lana Gutermann (4).JPG
 
Back
Top