• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
  • SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE MARCH/APRIL 2026

Good afternoon

Jackinch said:
Many thanks, Jeff. I purchased a Billings 'slip' and did my best to get square fitting on the ribs (my last effort was not fully symmetrical), and this appears better. I used balsa for the filling, and though it is coming along nicely, it is a beast to work with - albeit that I altered technique to substantially shape the blocks before installation (I tried to cut/sand the first few after they were glued in situ - typical army pioneer approach!). But I am happier this time. I envy your 'aviation' interest - I had thoughts on building a 'chopper' but never got round to it.
Click to expand...
When using balsa to in-fill, I use 'hard' balsa as opposed to the common 'soft' balsa, much easier to work. I purchase it from SLEC UK.
 
Thanks Stuart, I will know the next time. I am hoping to improve skills and technique with the current build...interpreting the instructions and plans is getting better too (newbie mistake :mad: ) I edited my reply just to confirm you are absolutely on the nail with the Balsa - the soft stuff is utterly horrible to work with, pro level gas mask needed to avoid the dust stuff. Best regards
 
Last edited:
Greetings Magic, you are almost neighbours (USA Style) with a buddy of mine from back in the day. He is an ex-Airbourne medic and longtime resident in San Antonio.

For my part I have been quiet since my intro post, primarily engaged on completing the hull on my Billings 1:75 Cutty Sark. Having decided to approach it in a different way (to the last one) I did, (of course I did), manage to encounter a few new challenges.

I filled the spaces between the ribs with Balsa and completed the planking recently (sounds fast, it has taken around three months), and have achieved the best symmetry of my boat-building career (not perfect, but much better than before).

I used a lot of techniques gained from various people on the forum, though I probably misinterpreted quite a bit. Still.....getting there.

1774139855167.png
1774140003048.png
1774140251529.png
 
Jackinch said:
Greetings Magic, you are almost neighbours (USA Style) with a buddy of mine from back in the day. He is an ex-Airbourne medic and longtime resident in San Antonio.

For my part I have been quiet since my intro post, primarily engaged on completing the hull on my Billings 1:75 Cutty Sark. Having decided to approach it in a different way (to the last one) I did, (of course I did), manage to encounter a few new challenges.

I filled the spaces between the ribs with Balsa and completed the planking recently (sounds fast, it has taken around three months), and have achieved the best symmetry of my boat-building career (not perfect, but much better than before).

I used a lot of techniques gained from various people on the forum, though I probably misinterpreted quite a bit. Still.....getting there.

View attachment 585815
View attachment 585816
View attachment 585817
Click to expand...
Very nice planking! Regards, Magic Mike
 
You must log in or register to reply here.
Back
Top