Table saw

I think I have also somewhere the small Proxxon (not using it, sorry)
If it is possible to open I will share here a photo of the content - so we can see the difference, if any are existing
 
[QUOTE = "Uwek, сообщение: 84891, участник: 5020"]
Proxxon (не использую его, извините)
Здесь есть возможность увидеть разницу.
[/ QUOTE]
 

Attachments

  • IMG_20200121_154357[1].jpg
    IMG_20200121_154357[1].jpg
    158.8 KB · Views: 38
  • IMG_20200121_170443[1].jpg
    IMG_20200121_170443[1].jpg
    118.9 KB · Views: 40
Last edited:
I was thinking to buy a Proxxon last year but decided to build one. Bought a 24VDC motor with a variable speed controller + two 5” blades (one fast cut & one fine cut) and the rest was scrap wood from around my shop. The miter gauge on the table top along with the rip fence & blade guard I had them from an old table saw

24F NEW MDF Table TOP.JPG

24G NEW MDF Table TOP.JPG

24I NEW MDF Table TOP.JPG
 
Last edited by a moderator:
I have this small Proxxon too but I changed to its big brother a few years ago. The small one is good for a low number of precision cuts (although its guide is not a serious one) but if you have to cut a number of planks for a usual size scratch built model, it would not do the job. Then you will need the big one, no question.
Janos
 
I have this small Proxxon too but I changed to its big brother a few years ago. The small one is good for a low number of precision cuts (although its guide is not a serious one) but if you have to cut a number of planks for a usual size scratch built model, it would not do the job. Then you will need the big one, no question.
Janos
 
I did my model stand from a big stam walnut from my neighbour with the big Proxxon. Sure, first with an 'old' hand saw.
Hallo @Crulle
we wish you all the BEST and a HAPPY BIRTHDAY
Enjoy your day
Birthday-Cake
And we would like to see your finished Wappen von Hamburg if possible
 
Hallo @Crulle
we wish you all the BEST and a HAPPY BIRTHDAY
Enjoy your day
Birthday-Cake
And we would like to see your finished Wappen von Hamburg if possible
Thank you Uwek! Doing other so called "homework" first and I think I will stark with new energy in autum again. Meantime I got new tools and better working space. I will send some photos "Wappen" next weeks.
At work: Wappen von Hamburg 1669, scratch with plans from Hoeckel since 2005. Body is done, Deck planking with boxwood should be the next step.
Take care, stay healty!
Crulle
 
I did my model stand from a big stam walnut from my neighbour with the big Proxxon. Sure, first with an 'old' hand saw.
one more year gone ....
Hallo @Crulle
we wish you all the BEST and a HAPPY BIRTHDAY
Enjoy your day
Birthday-Cake
And we would like to see your finished Wappen von Hamburg if possible
 
Hallo @Crulle
we wish you all the BEST and a HAPPY BIRTHDAY
Enjoy your special day
Birthday-Cake
And we would like to see your finished Wappen von Hamburg if possible
 
Back
Top