Enterprize CAF Model improvement of the kit with complete interiors

Iosto

Well-Known Member
Joined
Jul 9, 2018
Messages
28
Points
68

For the upper deck I preferred to change technique.
I made all the deck beams, and I started laying from the center where there are bilge pumps, then I proceed step by step with the milling and installation in groups of two.
First towards the bow then towards the stern.
The stern will be more complicated because it has the rudder with the maneuvering mechanisms and some interiors.
 

Iosto

Well-Known Member
Joined
Jul 9, 2018
Messages
28
Points
68

Stern castle
I had to change all the pieces of the kit because they were very fragile and not precise in size.
I insert some images even if everything will be finished after the bridges are completed.
I prefer to do this job after given the delicacy of the windows and details. 800-06-3163.jpg800-06-3164.jpg800-06-3201.jpg800-06-3202.jpg800-06-3203.jpg800-06-3205.jpg800-06-3206.jpg800-06-3207.jpg800-06-3208.jpg800-06-3209.jpg800-06-3210.jpg800-06-3211.jpg800-06-3236.jpg800-06-3265.jpg800-06-3163.jpg800-06-3164.jpg800-06-3201.jpg800-06-3202.jpg800-06-3203.jpg800-06-3205.jpg800-06-3206.jpg800-06-3207.jpg800-06-3208.jpg800-06-3209.jpg800-06-3210.jpg800-06-3211.jpg800-06-3236.jpg800-06-3265.jpg800-06-3267.jpg800-06-3269.jpg800-06-3364.jpg800-06-3365.jpg800-06-3366.jpg800-06-3367.jpg800-06-3382.jpg800-06-3384.jpg
 

Uwek

Admin
Staff member
Administrative
Moderator
Blandford Group Build
Joined
Dec 25, 2017
Messages
11,205
Points
928

Location
Vienna, Austria
Many thanks for starting this building log - I can fully underline the words of our friends here.
Very good - extremely good bashing and additional details - It is a pleasure to see your model -
Many Thanks for showing us what can be done with a good basis
 
Top