- Joined
- Jul 24, 2021
- Messages
- 26
- Points
- 48
Hello folks
I have for sell an upgrade set of unique accessories specifically made for Proxxon MF 70 milling machine. This is a must- have set for dedicated hobbyists who want to get the most out of their mini milling machine.
The set includes the following items:
1. Beautiful woden storage with two drawers. Made of solid cherry wood and handles are made of brass. Includes also a solid beech block for holding steel collets, milling bits, bolts and other small items.
2. Fixturing plate made of aluminium with hold down clamps. Used to hold non-regular shaped objects which cannot be held by the Proxxon vise. Dimensions 100x67x7mm.
4. Small tilting platform with M6 threaded holes for holding irregular shapes objects and the Proxxon PM 40 vise. Dimensions 72x48x20mm.
5. Holder for dial test indicator. The holder has an internal thread to be mounted directly on the spindle of the milling machine.
6. ER11 chuck with collets (sizes 1-7mm). Supplied on a wooden box. This chuck has an internal M8x0.75 internal thread to be mounted on the milling spindle and allows the system to use windmills larger than 3.75mm diameter up to 7mm. For non ferrous metals it is recommended to use a maximum diameter of 5mm.
7. Mini Adjustable end stop for using where a number of identical parts are being made.
8. LumenFox 70 ring light to improve the view during the milling operations.
9. Raising block with a height of 50mm and 4 extended screws to be fixed onto the base of the machine.
Price: £360
Shipping: free for UK shipping address only
10. Dust vacuum adaptor with vacuum hose 1.5m in length.
I have for sell an upgrade set of unique accessories specifically made for Proxxon MF 70 milling machine. This is a must- have set for dedicated hobbyists who want to get the most out of their mini milling machine.
The set includes the following items:
1. Beautiful woden storage with two drawers. Made of solid cherry wood and handles are made of brass. Includes also a solid beech block for holding steel collets, milling bits, bolts and other small items.
2. Fixturing plate made of aluminium with hold down clamps. Used to hold non-regular shaped objects which cannot be held by the Proxxon vise. Dimensions 100x67x7mm.
4. Small tilting platform with M6 threaded holes for holding irregular shapes objects and the Proxxon PM 40 vise. Dimensions 72x48x20mm.
5. Holder for dial test indicator. The holder has an internal thread to be mounted directly on the spindle of the milling machine.
6. ER11 chuck with collets (sizes 1-7mm). Supplied on a wooden box. This chuck has an internal M8x0.75 internal thread to be mounted on the milling spindle and allows the system to use windmills larger than 3.75mm diameter up to 7mm. For non ferrous metals it is recommended to use a maximum diameter of 5mm.
7. Mini Adjustable end stop for using where a number of identical parts are being made.
8. LumenFox 70 ring light to improve the view during the milling operations.
9. Raising block with a height of 50mm and 4 extended screws to be fixed onto the base of the machine.
Price: £360
Shipping: free for UK shipping address only
10. Dust vacuum adaptor with vacuum hose 1.5m in length.
