-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
I'm starting with the installation of the second layer of planks. Now the 1x6mm walnut strips.
I'll say in advance that this walnut plank is much more difficult to install and process. The material is thinner, when cutting the wood, the knife wants to run along the wood pattern, not the pre-marked line. The wood breaks easily when fastened.
I'll say in advance that this walnut plank is much more difficult to install and process. The material is thinner, when cutting the wood, the knife wants to run along the wood pattern, not the pre-marked line. The wood breaks easily when fastened.
This is where I stopped today. I stopped precisely because it is frustrating to sand this wood on this part of the arch in order to achieve a good result.
Although it is known that the hull will also be covered with copper plates and stuff, I still want the planking to be installed to be pleasing to the eye.
Although it is known that the hull will also be covered with copper plates and stuff, I still want the planking to be installed to be pleasing to the eye.