I need advise for a practical method to hold the molds in place until the frames are bent into place and the planking is done. I'm guessing that some type of glue will work, but I want to be sure that I can remove the bulkheads without damaging the keel, or other parts. The keel is white oak, 3/8" wide and 25 1/2" long from stern to forward perpendicular. The bulkheads are 1/8" plywood. Drawings of the bulkheads are in my scratch-build log for the Donald David.
Any suggestions are greatly appreciated.
Steven
Any suggestions are greatly appreciated.
Steven