HiSModel - New wooden blocks

  • Thread starter Thread starter BRadek
  • Start date Start date
  • Watchers Watchers 2
Joined
Jul 31, 2015
Messages
53
Points
103

Location
Czech Republic
Dear modelers,

You who know our e-shop know that we offer a range of common
blocks from walnut wood including sets of blocks for kits. However, besides the classic types of blocks we also offer other specific types that were used on different types of ships. We have now added two types of blocks to our range: big deadeyes and liftblocks.

Both types of blocks were used on older 17th century ship types like the Wasa or the Seven Provinces. While the big deadeyes were used to tension the main longitudinal stays. The liftblocks were used for hanging and guiding the liftrope on the main boom. We produces them in several different sizes and you can find them
HERE. Check also the pictures:

big deadeyes.jpg
liftblocks.jpg
 
Dear modellers,

We have now started to offer a new type of standard blocks. As many of you know, the shape of the blocks may have varied depending on the period and country of manufacture. For classic single, double and triple blocks, we can distinguish two basic shapes in historic sailboats up to the 20th century.

1) The older continental shape of blocks, which was more rounded, was generally used until the 18th century.
2) From the 18th century, the English began to use a more angular type of blocks, which we have been offering for a long time.

Now, depending on the type of your model, you can choose which type of blocks is more suitable and thereby increase the authenticity of your build even more.

You can check them on the photos here:
kontinentalni typ smes 06.jpgkontinentalni typ smes 02.jpgC-WaB-SB1-7 kontinentalni typ 03.jpg
 
We are constantly expanding our range of accessories. We have now created more categories of accessories sets for model ships. In particular, we have added new sets for model rigging and sails.
Many of these sets were created based on your orders and suggestions. And more will be added.

Categories of complete accessory sets can be found HERE
Here as an example you can see part of rigging and sails accessories on Cutty Sark 1:75 for kit by Billing Boats.

Model CS043R.jpg
 
Dear modelers,
we have another news for you. We have extended our range of blocks with new pendant blocks.
Pendant block is a common block used in the rigging of ships from antiquity or the medieval period. It was used on ships such as cogs, carracks, galleys, galleasses, and similar types. This type of block was used approximately until the end of the 17th century.

We sell these blocks in size 3-7 mm, which is the size of the inner sheave.

You can pre-order them now (they will be shortly in stock).
pendant blocks_01logo+napis.JPGpendant blocks_03mm_02logo.JPG
pendant blocks_06mm_02logo.JPGpendant blocks_04mm_01logo.JPG
 
Back
Top