Hms Ontario 1780 Cross section by Mike41

zoly99sask

Administrator
Staff member
Administrator
Joined
Apr 13, 2015
Messages
7,088
Points
738

Location
Saskatoon,Canada
HMS Ontario (1780)

HMS Ontario was a British warship that sank in a storm in Lake Ontario on 31 October 1780, during the American Revolutionary War. She was 22-gun snow, and, at 80 feet (24 m) in length, the largest British warship on the Great Lakes at the time. The shipwreck was discovered in 2008 by Jim Kennard and Dan Scoville. Ontario was found largely intact and very well preserved in the cold water. Scoville and Kennard assert that "the 80-foot sloop of war is the oldest shipwreck and the only fully intact British warship ever found in the Great Lakes.

History

Ontario was built in 1780 on Carleton Island, a major base in the St Lawrence River for the British during the Revolutionary War, but now part of New York. She was operated by the Royal Navy for the Provincial Marine in the capacity of an armed transport.

At the time, Ontario was the largest British warship to sail on the Great Lakes. She was launched just five months before she sank, and was used to ferry troops, supplies, and prisoners from one remote part of New York to another. She never saw battle.

Sinking

Ontario sank in a storm on 31 October 1780 while underway from Fort Niagara to Oswego. Approximately 130 men perished with the ship, comprising an estimated 60 British soldiers of the 34th (Cumberland) Regiment of Foot, {comprising one officer, 34 other ranks, 4 women and 5 children from the regiment. A crew of about 40 Canadians and possibly up to 30 American prisoners of war. News of the sinking of the Ontario was kept quiet for a number of years to hide the military loss.

Search and discovery

Sophisticated side-scan sonar technology was used in the search of HMS Ontario in late May 2008. A promising wreck was found between Niagara and Rochester, NY in an area of Lake Ontario where the depth exceeds 492 feet (150 m). The sonar imagery clearly showed a large sailing ship resting upright at an angle, with two masts reaching up at least 70 feet (21 m) above the bottom of the lake. The high-resolution images showed the remains of two crow's nests on each mast, strongly suggesting that the sunken vessel was the brig-sloop Ontario. Due to the depth limitations for diving on this shipwreck, a remotely operated underwater vehicle was deployed and confirmed the identity of the ship in early June 2008.

Kennard and Scoville believe that the cold, fresh water of Lake Ontario, combined with a lack of light and oxygen, have slowed decomposition and account for the ship being found largely intact, despite being on the bottom for 230 years. The shipwreck's discoverers have notified the New York State Office of Historic Preservation, however, the exact location of the wreck has not been publicly disclosed. The wreck is technically still considered the property of the British Admiralty and as such, will be treated as a war grave.

https://en.m.wikipedia.org/wiki/HMS_Ontario_(1780)

Hms Ontario 1780 drawing.jpg

Ontario-OCS_01_Page_1.jpegOntario-OCS_02_Page_1.jpegOntario-OCS_07_Page_1.jpeg
 

Uwek

Administrator
Staff member
Administrator
Joined
Dec 25, 2017
Messages
22,799
Points
1,038

Location
Vienna, Austria
Thanks Zoltan, here was a lot of good reading I can enjoy during the evening, the time is 17.33 here in norway.
And I forgot in the previous post in the other area.......with the link by Zoltán you can find also the book review of the AOTS Blandford......forgot, that I made it already.....
 

Mike41

Staff member
Forum Moderator
Joined
Aug 10, 2017
Messages
1,405
Points
443

Well after two years and one pandemic the 1:48 scale prototype is about finished. The drawing set will be finished about the middle of March.

The prototype was built using the same methods used in the Blandford Cross Section, the framing is more advanced and there is three times the number of frames the Blandford had. It is not a weekend project but should be a lot of fun.
 

Kurt Konrath

Kurt Konrath
Joined
Feb 11, 2020
Messages
2,731
Points
538

Location
Oklahoma City OK
It will be a good test of scratch building skills for us new to the art.

Like SigEp Ziggy said, I need to dig my big shop power tools out of storage and get my Blandford project back into work. Its sitting in box under my workbench waiting for the big tools needed to cut and sand frames.
 

zoly99sask

Administrator
Staff member
Administrator
Joined
Apr 13, 2015
Messages
7,088
Points
738

Location
Saskatoon,Canada
Well after two years and one pandemic the 1:48 scale prototype is about finished. The drawing set will be finished about the middle of March.

The prototype was built using the same methods used in the Blandford Cross Section, the framing is more advanced and there is three times the number of frames the Blandford had. It is not a weekend project but should be a lot of fun.
Thank you Mike,it was a long haul!
 

Mike41

Staff member
Forum Moderator
Joined
Aug 10, 2017
Messages
1,405
Points
443

Thanks, Zoly are you still working on the full build?

Hi Kurt, it would be good to finish the Blandford before starting this one.
 
Top