It's similar at Le Rochefort; here you also had to get on all fours to get to the stove and to the cabins if you wanted to go to bed.
La Belle 1/36 - Plan by Jean Boudriot / myself
- Thread starter Olivers Historic Shipyard
- Start date
- Watchers 59
Added the Endboss, the cheeks, and the bolsters.
Last edited:
looks good, bit by bit the little beauty is growing.
- Joined
- Mar 1, 2022
- Messages
- 537
- Points
- 308
True story!Dear Oliver
the cheeks, and the bolsters looks beautiful
Thank you all for the kind comments and the likes.
Next step is testing the workaround with the CNC for repeat parts.
Next step is testing the workaround with the CNC for repeat parts.
The cleats correspond geometrically to the small cleats on the wreck. As I don't trust glued cleats, I will also secure them with a bolt.
The 3mm sheaves will be installed in the crane beams, mast cradles and the fixed snatch blocks on the railing. According to the wreck, La Belle only had wooden sheaves and axles. Before installation, the parts are cleaned again, the cleats rounded, etc.
The 3mm sheaves will be installed in the crane beams, mast cradles and the fixed snatch blocks on the railing. According to the wreck, La Belle only had wooden sheaves and axles. Before installation, the parts are cleaned again, the cleats rounded, etc.