Le Fleuron 1729 scale 1/75 - Boudriot & Delacroix

[KMSvideo]

Thank you @Mirek and @Magic Mike

 

[KMSvideo]

My first serious carving skills

Attempting to create a flower - opening for Tack



and here is my work

 

[BradNSW]

Well done!! Those are small rosettes (flowers) at this scale, and you did them justice!

These details will make this a superb model. Thanks for sharing!

 

[KMSvideo]

Thanks @BradNSW

I'm continuing to add pins. I think I'm about halfway there.
There's not much on the outside of the cape. But the inside will be fun.



Blaise Joseph Ollivier himself came to check it out.
Hopefully he is satisfied.

 

[BradNSW]

Looking awesome! Glad the inspector was happy too.

Thanks for sharing the porcupine/pin-cushion shot.

 

[Mirek]

Rozpocząć od dekoracji kokardki. To jeden z urządzeń na tej łodzi. Po siódmej próbie w pierwszym wyniku, z którego wynika wynik. Potem było już łatwo.
[ZAŁĄCZ]521014[/ZAŁĄCZ][ZAŁĄCZ]521015[/ZAŁĄCZ[ZAŁĄCZ]521016[/ZAŁĄCZ[ZAŁĄCZ]521017[/ZAŁĄCZ[ZAŁĄCZ]521018[/ZAŁĄCZ[ZAŁĄCZ]521019[/ZAŁĄCZ[ZAŁĄCZ]521020[/ZAŁĄCZ][ZAŁĄCZ]521021[/ZAŁĄCZ]

Dziękuję @BradNSW

Nadal dodaję piny. Myślę, że jestem w połowie drogi.
Na zewnątrz peleryny nie ma wiele do zobaczenia. Ale w środku będzie fajnie.

View attachment 529342

Blaise Joseph Ollivier osobiście przyjechał to sprawdzić.
Mam nadzieję, że jest zadowolony.
View attachment 529343

Witaj
Z jakiego drzewa masz robione kołki i jakiej średnicy
. Pozdrawiam Mirek

 

[KMSvideo]

Witaj
Z jakiego drzewa masz robione kołki i jakiej średnicy
. Pozdrawiam Mirek

Hi Mirek
The pegs are made of maple wood and have a diameter of 0.4 mm.
Miro

 

[KMSvideo]

I started making outdoor ladders and scuff strips.
All with just a scalpel and a flat file.

 

[dockattner]

I'm certainly enjoying following along on this build. Thanks for sharing your excellent work.

 

[KMSvideo]

Thank you for your feedback, it was very encouraging.

I continue with what was probably the most difficult for me, the side galleries.



One last look at the latrine and it's about to close.

 

[Mirek]

Witaj
Będzie piękna galeria rufowa. Pozdrawiam Mirek

 

[Magic Mike]

The side galleries look great! I guess the two little portholes would let in a little light as well as fresh air! Magic Mike

 

[KMSvideo]

Thank you @Mirek and @Magic Mike

I thought for a long time about how to make the stairs as faithfully as possible without a milling machine or CNC.
Finally, I drew the sidewall in two parts and had it laser cut. The outer part had the exact desired shape and size, and the inner part had grooves for the steps.



I left the back part longer so it wouldn't fall apart.


After gluing, I sanded the inner part to match the outer part and was able to glue the steps.



And one more look through the shooting gallery.

 

[KMSvideo]

Pokus o dekoráciu. Predstavovala som si to veľmi jednoduché, ale pravda je úplne iná.

 

[KMSvideo]

Nie som veľmi dobrý v vyrezávaní ornamentov na Le Fleurone, tak som začal s menšou lodičkou z tých dvoch. Aspoň otestujem, či som správne nakreslil a naplánoval.

Najprv som si vyrobil prípravok, do ktorého som umiestnil veľmi jemnú kostru.








Kostra je naozaj veľmi krehká.




Podarilo sa mi zlomiť si pár rebier, ale našťastie sa to dá napraviť.

 

[Mirek]

Witaj
Piękna łódeczka. Pozdrawiam Mirek

 

[KMSvideo]

Witaj
Piękna łódeczka. Pozdrawiam Mirek

Thank you Mirek.

I finished this little guy today.

 

[BradNSW]

Such detail at this scale, is incredible!!

That tiller is awesome and looks so fragile.

Thanks for sharing this wonderful work with your great photos!

 

[KMSvideo]

Také detaily v tomto meradle sú neuveriteľné!!

Ten kultivátor je úžasný a vyzerá tak krehko.

Ďakujem za zdieľanie tejto úžasnej práce s vašimi skvelými fotografiami!

Ďakujem za uznanie.

 

[KMSvideo]

After a short break and an involuntary stay in the hospital, I started making a balcony and tried my hand at carving.
I couldn't find the bottom of the balcony in the drawings, so I was inspired by Jacques Maillière.
His work is divine.

Supports and an attempt at carving.



Deck covering.



And finally, frames and flowers. I damaged the windows when installing the balcony, so I need to repair them.