Mast Finishing / octagon shape

Joined
May 7, 2013
Messages
63
Points
58

I am working on the Victory Cross Section (Corel). I would appreciate any tips on making the octagonal shape on masts or making Mast Furnishings (Corel's name). below are pictures. the furnishings are number 59 and are mounted on the shaped area of mast 57.

Thanks, Richard

octagon 2.jpgoctagon.jpg
octagon.jpg
 

Attachments

  • octagon 2.jpg
    octagon 2.jpg
    101.7 KB · Views: 3
Another thought. Take a picture of the octagon shape, transfer to the end of the mast, measure the length of the octagon with the drawings, mark on the mast, cut with a sharp knife or with scroll saw, sand with dremel. Works pretty well and much simpler. Should be a tutorial somewhere on the web.
 
Back
Top