Happy Birthday, Manatas. Enjoy your special day! 
N. S. Del Rosario / 1759 Felucca/ 1:36 building log
- Thread starter Manatas
- Start date
- Watchers 21
-
- Tags
- ancre felucca 1759
FROM ME TOO, Don PS ANY MORE PROGRESS ON YOUR BUILD FOLLOWING THIS ONE AS I AM CONTENPLATING GETTING THIS ONE FROM ANCRA, AS I AM NOT DOING THE LE ROCHEFORT VERY WELL RIGHT NOW AND I WISH THERE WAS A LOG ON HER AS THIS IS MY FIRST FRENCH AND FIRST SCRATCH BUILD AND HAVE A LOT OF QUESTIONS AS THERE IS NO LOG ON THIS ONE CAUSING ME QUITE A FEW PROBLEMS, 3-D WOULD HELP VERY, VERY, MUCH. Don
Please check also the booklet - on page 25 is the same shown plus additional drawings of the line construction.
This one on the drawing seems also to be not correct, due to the fact, that it is not central but moved to the left (which would surprise me).
Unfortunately Franco Fissore is not a member here, so we can not ask him directly
This one on the drawing seems also to be not correct, due to the fact, that it is not central but moved to the left (which would surprise me).
Unfortunately Franco Fissore is not a member here, so we can not ask him directly
Hello friends,
I have several questions about mainmast step, maybe someone could help me to clarify situation:
#1 plans didnt show rear view of mainmast step and I dont understand what must be form of four small details wich holding mainamst step I supose. Maybe you have similar places on your model or some kind of historical researches info?
#2 nd question: these black square I suppose marks square form nails if yes what do you thing if I make it like this:
if not, then what shows these black squares?
Thanks in advance. The mainmast step and I whaiting your help to continue
I have several questions about mainmast step, maybe someone could help me to clarify situation:
#1 plans didnt show rear view of mainmast step and I dont understand what must be form of four small details wich holding mainamst step I supose. Maybe you have similar places on your model or some kind of historical researches info?
#2 nd question: these black square I suppose marks square form nails if yes what do you thing if I make it like this:
if not, then what shows these black squares?
Thanks in advance. The mainmast step and I whaiting your help to continue
I SURE DO LOVE THIS ONE GREATLY, I LIKE MODELS THAT THE FRAMING IS DIFFERENT, I HAVE the english instructions GREAT i probably will order the MONOGRAPH WITH MY NEXT ORDER TO ANCRE but the build is going to be a while, quite a while, your work is terriffic you should be proud would LOVE TO SEE MORE POSTS AND PICTURES. Don
I guess it is version A, means the top of these stiffeners are somehow horizontal, or following parallel to the frame form.....
between them are the bilge pumps installed in four boxes, this detail you can see explained in the Monograph booklet at page 79 Drawing 8
between them are the bilge pumps installed in four boxes, this detail you can see explained in the Monograph booklet at page 79 Drawing 8
Hello Manatas. Very nice and steady progress! Please keep those photos coming! 
beautiful work, as i said before this is my next scratch build love the frames. Don
Hello. Definitely number 5 !! The joint must have a certain width. I keep my fingers crossed for the building!!
Ondras
Ondras
I agree with the collegues - No. 5 with the paper - what is the thickness of the paper you are using? -> It is looking very good
its simple 80gsm office paper, couldnt find any thicker at home..
As much, as like #5, I am afraid it might be a bit big (prominent) for the scale (IMHO). Will you add treenails to the deck as well? If yes, can you make samples with three nails in-place? I suggest #6