Newbie and another Halcon

U

Ulysse_b

Joined
Jan 8, 2022
Messages
15
Points
48

Hello everyone,

I'm a newbie here but I have see a lot of post and try to make the Halcon 1/100 from ali express.
I also have a bequine at my parents home I hope to try soon.

The kit is pretty cheap and I understand why.
So far it got a bit treaky on assembling the hull and the planks don't align perfectly (specialy on the front) but I hope a little filling and sanding will help.
Here are some picture of the boat so far.
16417283783368221648550900952710.jpg
16417284242048218311606017090639.jpg

Also I'm french, if you see some mistakes on my posts you can correct me it will help me to progress.

Thank you everyone !!
 
Welcome aboard! Looking forward to seeing more of your work.
 
also from my side a warm welcome here on board of our forum
 
Thank you everyone !

The hull is finish,
16418166002417529033108676263544.jpg
16418166814614679848035833538828.jpg

I still don't know if I paint it, I kinda like how it looks and the planks alignement was better for the last planks
It took me a little while to bend and glue the planks,
I used an iron and a cup of water to bend each plank and kept them in place with clothes peg (my fingers for the last ones)
 
Hello everyone,

I made big mistakes which pretty much was hard to make up for but here is the hull now.
I sanded it and tried to stain it with black tea (it was too diluted but it was a good idea, I will try again)
20220117_221217.jpg
Also, I sanded the low masts to enter the holes, it was easier and cleaner than I though !

16424547043561556049396361849261.jpg

1642454806323645707295230241709.jpg
 

Attachments

  • 20220117_221147.jpg
    20220117_221147.jpg
    200.9 KB · Views: 2
Ulysse_b said:
Thank you everyone !

The hull is finish,
View attachment 281757
View attachment 281758

I still don't know if I paint it, I kinda like how it looks and the planks alignement was better for the last planks
It took me a little while to bend and glue the planks,
I used an iron and a cup of water to bend each plank and kept them in place with clothes peg (my fingers for the last ones)
Click to expand...
Welcome, good work on the planking as the parts quality is pretty poor.
 
Ulysse_b said:
Hello everyone,

I'm a newbie here but I have see a lot of post and try to make the Halcon 1/100 from ali express.
I also have a bequine at my parents home I hope to try soon.

The kit is pretty cheap and I understand why.
So far it got a bit treaky on assembling the hull and the planks don't align perfectly (specialy on the front) but I hope a little filling and sanding will help.
Here are some picture of the boat so far.

Also I'm french, if you see some mistakes on my posts you can correct me it will help me to progress.

Thank you everyone !!
Click to expand...
Hallo @Ulysse_b
we wish you all the BEST and a HAPPY BIRTHDAY
Birthday-Cake
 
You must log in or register to reply here.
Back
Top