Suction adapter for the Proxxon DH40 for download

[Olivers Historic Shipyard]

I've created a suction adapter for the Proxxon DH40.
It can be downloaded from my website and printed out yourself. The diameters have been increased by 0.2 mm so that the tube can be fitted without any problems.

https://www.olivers-historic-shipyard.com/

 

[maltbyguy]

Great idea
Are you planning on manufacturing them for sale ?

 

[Olivers Historic Shipyard]

No, its only just for fun for us modellers.

 

[Dubz Modelling World]

Printing already Thanks Oliver!

 

[clogger]

That’s great. Looking forward to printing this off. I must say it’s very satisfying being able to design then 3D printing your design just like that! Thanks Oliver’s.

 

[Uwek]

a very good add-on for this tool - I was wondering why Proxxon did not offre this already original
Good for all who have the possibility to print such a device

 

[Dubz Modelling World]

Done. Thanks again Oliver!

 

[Sarge]

Installation completed and tested

 

[Maarten]

I've created a suction adapter for the Proxxon DH40.
It can be downloaded from my website and printed out yourself. The diameters have been increased by 0.2 mm so that the tube can be fitted without any problems.

https://www.olivers-historic-shipyard.com/


View attachment 448321View attachment 448322View attachment 448323

Hi Oliver,

That looks great.
I have downloaded it and have it printed via a 3D print service for just €8,- as I don't have a printer myself. Looking forward to the results.

Many thanks again for sharing this, much apreciated as the DH 40 creates a lot of chips and dust.

 

[shota70]

I've created a suction adapter for the Proxxon DH40.
It can be downloaded from my website and printed out yourself. The diameters have been increased by 0.2 mm so that the tube can be fitted without any problems.

https://www.olivers-historic-shipyard.com/


View attachment 448321View attachment 448322View attachment 448323

Oliver my dear friend
First I would like to thank you for taking the initiative in designing this important add-on that will save us a lot of dirt and sawdust.
regards Shota

 

[Maarten]

My 3D printed part came in today.
And thx to Oliver this was plug and play to install it.

 

[Olivers Historic Shipyard]

I am happy to hear that its works well.