Very nice and very fine work, Stephan. This must be very satisfying.
Regards, Peter
As good as I've seen Stephan. Persistence and skill with a fine outcome.
Dear Stephan
wonderful work, thanks for the explanations with the pictures, it's halp to me to Learn from you
Some really fine work Stephan. Must be very satisfying to be your own blacksmith.
Excellent craftmanship.
Good morning Stephan. Shroud cleats are a pain in the butt….(well for me). Brilliantly done. Cheers Grant
Guys thank you all for the kind words, this is for me a boost to go further rigging this ship.Stephan, very impressive. The mouse and stay are 2nd to none as is your served cable. But really, the the metal work, in scale on your hook stropped block is super. You seem to be moving right along with your rigging of this wonderful ship.
Thanks HermanAwesome blocks and hooks and cleats. Impressive work.
Thanks Jim. Handmade producs are never uniform but if you wish I can make a step by step photoslide for a 3 mm block. This is different to a 4 mm or bigger block. Because the brass wire is much more fragile.Absolutely love those hooks. I am struggling to make mine, I still cannot develop the system for making them in uniform.
Thanks My friendDear Stephan
you are doing wonderful work on the blocks, the hooks, the cleats and shrouds well done my friend.
Yes, they are compared to the method Mondfeld use. That is almost similar to other methods. The outcome is the same.I think the ropes look a bit thin in the photos.
Are the diameters correct?
I have 2 mm blocks in my stock. I'll give it a try.I appreciated the offer, Stepan. I need to make the hooks to rig the guns. The hooks are 2.00mm long, they are very tinny. I can make the ring and the hook as separate products but not the whole hook. LOL
dear Stephan@Jimsky Jim special for you a small tutorial to make a hook on a 2,5 mm block. I don't have 2 mm. blocks. But the idea is the same. Lets start by telling it is small, very small and you need steady hands and magnifier glasses.
I'm starting with 2,5 mm block and 0,3 mm. brass wire
View attachment 403575
First take the wire between the tweezer on the spot where the thickness is equal to the thickness of the block. And make a square where the block fits in.
View attachment 403576View attachment 403577View attachment 403578
Twist carefully the both ends around each other. By this way the block is fixed in place.
View attachment 403579
Continue till the length is twisted nicely. Careful, step by step, twist by twist. 0,3 mm. brass wire breaks easily when you twist.
View attachment 403580View attachment 403581
I use a clamping tweezer where I adjusted the point so it holds the block in place.
View attachment 403582View attachment 403583
Solder the twisted end. and use a little needle file ( Corradi) and the sandpaper rounds for the drill to shape the end after soldering. Let it look brass again and let the twist disappear.
View attachment 403584View attachment 403585View attachment 403586View attachment 403587
Sorry the last picture is a little blurred.
Then shape the hook with a small round pliers and shape the end with your file of the sandpaper rounds.
View attachment 403588
With a small 0,3 mm. drill I make on top of the block a little hole under the brass wire. Take care, this is delicate work. A ring I made on a 0,5 drill and cut with a x-acto knife is put in the hole I created.
View attachment 403589View attachment 403590View attachment 403591View attachment 403592View attachment 403593
And the little bugger is ready to use, I don't black him, in time it will be black by itself. But if you want to black it use these little cotton sticks with brass black on it to rub over the brass.
View attachment 403594View attachment 403595
This is how to make a hook on a tiny 2,5 mm. or 2 mm. block. On a bigger block there is another way to do it.
I hope this was helpful Jim and maybe it is just an idea to find your own way to make these. It took me half an hour to make, but the next one will be much quicker because I know what tools I need. How much do you have to make?
WOW! What an honor, I have a post dedicated to me! First of all many, many thanks! Since I virtually met you here and after some of your posts, I knew there was nothing that could stop you from fabricating this and that. You will always find a way to do it! Much appreciated for your tutorial and dedication, specifically, I know that you have lost some strength in your fingers, BTW hope this will go away soon. I am going to try this for sure! Thanks again, bro!!@Jimsky Jim special for you a small tutorial to make a hook on a 2,5 mm block. I don't have 2 mm. blocks. But the idea is the same. Lets start by telling it is small, very small and you need steady hands and magnifier glasses.
I'm starting with 2,5 mm block and 0,3 mm. brass wire
View attachment 403575
First take the wire between the tweezer on the spot where the thickness is equal to the thickness of the block. And make a square where the block fits in.
View attachment 403576View attachment 403577View attachment 403578
Twist carefully the both ends around each other. By this way the block is fixed in place.
View attachment 403579
Continue till the length is twisted nicely. Careful, step by step, twist by twist. 0,3 mm. brass wire breaks easily when you twist.
View attachment 403580View attachment 403581
I use a clamping tweezer where I adjusted the point so it holds the block in place.
View attachment 403582View attachment 403583
Solder the twisted end. and use a little needle file ( Corradi) and the sandpaper rounds for the drill to shape the end after soldering. Let it look brass again and let the twist disappear.
View attachment 403584View attachment 403585View attachment 403586View attachment 403587
Sorry the last picture is a little blurred.
Then shape the hook with a small round pliers and shape the end with your file of the sandpaper rounds.
View attachment 403588
With a small 0,3 mm. drill I make on top of the block a little hole under the brass wire. Take care, this is delicate work. A ring I made on a 0,5 drill and cut with a x-acto knife is put in the hole I created.
View attachment 403589View attachment 403590View attachment 403591View attachment 403592View attachment 403593
And the little bugger is ready to use, I don't black him, in time it will be black by itself. But if you want to black it use these little cotton sticks with brass black on it to rub over the brass.
View attachment 403594View attachment 403595
This is how to make a hook on a tiny 2,5 mm. or 2 mm. block. On a bigger block there is another way to do it.
I hope this was helpful Jim and maybe it is just an idea to find your own way to make these. It took me half an hour to make, but the next one will be much quicker because I know what tools I need. How much do you have to make?
Your welcome, love to do things like this. Bigger blocks are another approch. This one I copied of a real historical hook and block I seen in a museum, can't find the picture back but looks like thisWOW! What an honor, I have a post dedicated to me! First of all many, many thanks! Since I virtually met you here and after some of your posts, I knew there was nothing that could stop you from fabricating this and that. You will always find a way to do it! Much appreciated for your tutorial and dedication, specifically, I know that you have lost some strength in your fingers, BTW hope this will go away soon. I am going to try this for sure! Thanks again, bro!!
That tutorial was so helpful, thank you for sharing.@Jimsky Jim special for you a small tutorial to make a hook on a 2,5 mm block. I don't have 2 mm. blocks. But the idea is the same. Lets start by telling it is small, very small and you need steady hands and magnifier glasses.
I'm starting with 2,5 mm block and 0,3 mm. brass wire
View attachment 403575
First take the wire between the tweezer on the spot where the thickness is equal to the thickness of the block. And make a square where the block fits in.
View attachment 403576View attachment 403577View attachment 403578
Twist carefully the both ends around each other. By this way the block is fixed in place.
View attachment 403579
Continue till the length is twisted nicely. Careful, step by step, twist by twist. 0,3 mm. brass wire breaks easily when you twist.
View attachment 403580View attachment 403581
I use a clamping tweezer where I adjusted the point so it holds the block in place.
View attachment 403582View attachment 403583
Solder the twisted end. and use a little needle file ( Corradi) and the sandpaper rounds for the drill to shape the end after soldering. Let it look brass again and let the twist disappear.
View attachment 403584View attachment 403585View attachment 403586View attachment 403587
Sorry the last picture is a little blurred.
Then shape the hook with a small round pliers and shape the end with your file of the sandpaper rounds.
View attachment 403588
With a small 0,3 mm. drill I make on top of the block a little hole under the brass wire. Take care, this is delicate work. A ring I made on a 0,5 drill and cut with a x-acto knife is put in the hole I created.
View attachment 403589View attachment 403590View attachment 403591View attachment 403592View attachment 403593
And the little bugger is ready to use, I don't black him, in time it will be black by itself. But if you want to black it use these little cotton sticks with brass black on it to rub over the brass.
View attachment 403594View attachment 403595
This is how to make a hook on a tiny 2,5 mm. or 2 mm. block. On a bigger block there is another way to do it.
I hope this was helpful Jim and maybe it is just an idea to find your own way to make these. It took me half an hour to make, but the next one will be much quicker because I know what tools I need. How much do you have to make?
Your welcome, and thanks for your nice words.Just - BRAVO
Looking very good - and many thanks for showing us the working steps in detail