- Joined
- Oct 9, 2020
- Messages
- 2,061
- Points
- 488

Just wondering if pearwood is a difficult material to work with? does it sand well? does it cut well?
**VIEW THREAD HERE** |
He bought a kit made out of pearwoodHi, Jack Sparrow, could you reveal where you buy your wood from?
great, thanks.Pearwood is one of the best timbers for model makers. Somewhat soft and with not too tight grains it can be used for nearly every aspect of it. It is best for planking (prevent it from physical impact like hard pressing with semi-sharp objects or hammering) and for deck furnitures. Easy to bend with the solder iron-type bender, sands good and works well with different glues. It can be well stained or painted. Not recommended for carvings in our usual scales.
János
Hi. I purchased the Pearwood Enterprize 1/96. I had a choice between that and the boxwood kit. The boxwood kit is way more expensive. Why? I do not know...Hi, Jack Sparrow, could you reveal where you buy your wood from?
Just wondering if pearwood is a difficult material to work with? does it sand well? does it cut well?
because the wood by itself is more expensive than pear wood - price differences in such kits is caused by the price differences in the material "wood"Hi. I purchased the Pearwood Enterprize 1/96. I had a choice between that and the boxwood kit. The boxwood kit is way more expensive. Why? I do not know...
That surprised me that the boxwood was more expensive than the pearwood. I thought it would have been the other way around. Maybe it's because the kit comes from China and they don't have boxwood over there? I don't know...because the wood by itself is more expensive than pear wood - price differences in such kits is caused by the price differences in the material "wood"
Usually the prices are growing from Cherry -> Pear -> boxwoodThat surprised me that the boxwood was more expensive than the pearwood. I thought it would have been the other way around. Maybe it's because the kit comes from China and they don't have boxwood over there? I don't know...
That surprised me that the boxwood was more expensive than the pearwood. I thought it would have been the other way around. Maybe it's because the kit comes from China and they don't have boxwood over there? I don't know...
That surprised me that the boxwood was more expensive than the pearwood. I thought it would have been the other way around. Maybe it's because the kit comes from China and they don't have boxwood over there? I don't know...
you are right! Of course. I did mix them up. I seem to use those two interchangeably...Maybe ,and I am just gussing that you might mixing up boxwood with basswood ,they are notvthe same though ,basswood is very cheap and used in most kits along with walnut
very interesting information.The reason for the price differential is that box trees - of almost any variety - grow very slowly compared to pear trees and are much rarer, And unlike pear trees they are not farmed for fruit in orchards as pear trees are. The following news item gives you some idea. 200Ha is close to 500 acres btw.
"The company “Polosa” completed the establishment of an intensive pear orchard on 55 hectares in the spring, making it the largest project in the history of orchard development in Russia. The company also plans to plant an additional 30 hectares in the autumn and intends to increase the plantation area to nearly 200 hectares. The “Sad” enterprise is also among Russia's top five largest orchards, with 22 hectares dedicated to pear trees.
According to Sharip Sharipov, Russia only meets 20% of its demand for pears. Around 250,000 tons of this fruit are imported annually into the country. He noted that this niche remains untapped, and Dagestani orchardists have taken on the challenge of developing its cultivation. The natural and climatic conditions of southern Dagestan allow for very effective cultivation of pear orchards."
ETA- For those with an Ecological turn of mind, pear is obviously more sustainable than wild box out of (perhaps) the rain-forest.
It does look reddish in the pictures, but I can live with that.I use Swiss (steamed) pear for items that might otherwise be painted red as it has a reddish tone to it. It contrasts well with holly and castello box or European boxwood. For me the color is too red for planking, but that's just me. Go with what you like best. See https://shipsofscale.com/sosforums/threads/pear-wood-vs-cherry-wood.5322/page-2 post number 22 from Dave Stevens
Allan