• Beginning at 5:00AM PST (13:00 UTC) on Friday February 14th, all services in the Los Angeles, California, USA Data Center will be offline to perform a Data Center Migration. Due to the nature of this migration, we anticipate up to 24 hours of downtime to safely complete this work. Please be patient during this time and thank you for being a valuable member of our community.

amati whaleboat

roadrunner

roadrunner

Joined
Dec 22, 2022
Messages
22
Points
13

Location
Scotland
has anyone have a build log of Amati bedford whaleboat. I am having a problem tapering the inner planking. The insrrtructions are not very clear. It just says fit the planks ensuring right tapering but there are no sketches in the instructions
 
AllanKP69 said:
It can probably be done using the same methods for tapering the breath of the outer planking on the hull. The following may be helpful to you.
Allan

https://cdn.wildapricot.com/278718/resources/Documents/articles/LiningOffYourHullPlankingTutorialAndFan.pdf?version=1579727184000&Policy=eyJTdGF0ZW1lbnQiOiBbeyJSZXNvdXJjZSI6Imh0dHBzOi8vY2RuLndpbGRhcHJpY290LmNvbS8yNzg3MTgvcmVzb3VyY2VzL0RvY3VtZW50cy9hcnRpY2xlcy9MaW5pbmdPZmZZb3VySHVsbFBsYW5raW5nVHV0b3JpYWxBbmRGYW4ucGRmP3ZlcnNpb249MTU3OTcyNzE4NDAwMCIsIkNvbmRpdGlvbiI6eyJEYXRlTGVzc1RoYW4iOnsiQVdTOkVwb2NoVGltZSI6MTczODc5MzMxNH0sIklwQWRkcmVzcyI6eyJBV1M6U291cmNlSXAiOiIwLjAuMC4wLzAifX19XX0_&Signature=Orwam3tiOrivXg-mGx77nQ457XFI7CJzzIPP0CuqkbONPPaWGCFavMoaBpTvpZZNYAsz2QghTFGOYPJHRpgb1jXW8geu0qH7iey0zptmQ4lylqqAkknElMYm9PsLfx2Nagy7Q38h0mDNDDk-PlpES6n-0r8noYMxx--H93Q1QLRzmKb4XH8VyflYBeYTWVVSeNS-YXDL6ewUNQAZYelHTgBK3ILrDA1wVpcHI5TM0uQzcAhtau1LIiXtPeiT2BF-yN8q7tjVvgoFyNGd6ZGJpVSFu-udRcwFeBZ8lid1GyCwqvwfx4ObgkcmhsgM7PPLJUMNMLZMFTWN7CA-siT1vQ__&Key-Pair-Id=K27MGQSHTHAGGF
Click to expand...
Hi Allan. The above link pointed to someone's Google Drive which none of us have access to. If you have the authority to make changes to his drive, please make it publicly accessible.
 
There is a multi part build log of this kit on YouTube. The poster is named “Tagliamare”. Looks like you may have found it as I saw your post on MSW.
 
I had a look at Taglameris build log but he doesnt show how he did the inner planks. There is a video oof him sanding the ends of the strips but not hoe he tapered them. I cant find any other logs of the Amati kit.
 
another problem I am having is the plan shows 7x5mm wide strips each side but this only comes from the keel and slightly up the side of the ribs.
 
You must log in or register to reply here.
Back
Top