amati whaleboat

[roadrunner]

has anyone have a build log of Amati bedford whaleboat. I am having a problem tapering the inner planking. The insrrtructions are not very clear. It just says fit the planks ensuring right tapering but there are no sketches in the instructions

 

[AllanKP69]

It can probably be done using the same methods for tapering the breath of the outer planking on the hull. The following may be helpful to you.
Allan

 

[Jimsky]

It can probably be done using the same methods for tapering the breath of the outer planking on the hull. The following may be helpful to you.
Allan

https://cdn.wildapricot.com/278718/resources/Documents/articles/LiningOffYourHullPlankingTutorialAndFan.pdf?version=1579727184000&Policy=eyJTdGF0ZW1lbnQiOiBbeyJSZXNvdXJjZSI6Imh0dHBzOi8vY2RuLndpbGRhcHJpY290LmNvbS8yNzg3MTgvcmVzb3VyY2VzL0RvY3VtZW50cy9hcnRpY2xlcy9MaW5pbmdPZmZZb3VySHVsbFBsYW5raW5nVHV0b3JpYWxBbmRGYW4ucGRmP3ZlcnNpb249MTU3OTcyNzE4NDAwMCIsIkNvbmRpdGlvbiI6eyJEYXRlTGVzc1RoYW4iOnsiQVdTOkVwb2NoVGltZSI6MTczODc5MzMxNH0sIklwQWRkcmVzcyI6eyJBV1M6U291cmNlSXAiOiIwLjAuMC4wLzAifX19XX0_&Signature=Orwam3tiOrivXg-mGx77nQ457XFI7CJzzIPP0CuqkbONPPaWGCFavMoaBpTvpZZNYAsz2QghTFGOYPJHRpgb1jXW8geu0qH7iey0zptmQ4lylqqAkknElMYm9PsLfx2Nagy7Q38h0mDNDDk-PlpES6n-0r8noYMxx--H93Q1QLRzmKb4XH8VyflYBeYTWVVSeNS-YXDL6ewUNQAZYelHTgBK3ILrDA1wVpcHI5TM0uQzcAhtau1LIiXtPeiT2BF-yN8q7tjVvgoFyNGd6ZGJpVSFu-udRcwFeBZ8lid1GyCwqvwfx4ObgkcmhsgM7PPLJUMNMLZMFTWN7CA-siT1vQ__&Key-Pair-Id=K27MGQSHTHAGGF

Hi Allan. The above link pointed to someone's Google Drive which none of us have access to. If you have the authority to make changes to his drive, please make it publicly accessible.

 

[jbc77]

There is a multi part build log of this kit on YouTube. The poster is named “Tagliamare”. Looks like you may have found it as I saw your post on MSW.

 

[roadrunner]

There is a multi part build log of this kit on YouTube. The poster is named “Tagliamare”. Looks like you may have found it as I saw your post on MSWI had a look at

 

[roadrunner]

I had a look at Taglameris build log but he doesnt show how he did the inner planks. There is a video oof him sanding the ends of the strips but not hoe he tapered them. I cant find any other logs of the Amati kit.

 

[roadrunner]

another problem I am having is the plan shows 7x5mm wide strips each side but this only comes from the keel and slightly up the side of the ribs.

 

[roadrunner]

I meant 1mm x 5mm strips 7off each side The previous post is misleading

 

[AllanKP69]

Thanks Jim,
I am editing the post to attach a PDF instead and it is attached here as well.
Thanks again for your help
Allan