• Ships of Scale has incorportated an extra level of security when you log In. Please follow on-screen prompts to acknowledge that you are not a robot via a "Check Box" or a "Pictorial Check Box Puzzle". This is needed due to higher level of AI Activity Security.
  • SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE July/August 2026
  • Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

Unicorn Models - New Kit Bonhomme Richard 1779 1:48 - New Aft Midship Cross Section

Hi guys,
The video tutorials for the new cross-section of the Bonhomme Richard have been updated to the episode 18, please check post #115
 
Greetings, I'm just wondering if there is any plan for the release of front and back sections? maybe a full POF kit of the Bonhomme Richard?
 
Loracs said:
Greetings, I'm just wondering if there is any plan for the release of front and back sections? maybe a full POF kit of the Bonhomme Richard?
Click to expand...
The next section will be the fore midship that carries the boats, but it will take some time. And once all four sections are completed, this series will be finished.
 
I’m in the process of building this kit.
Have a question
In the manual part part no cl 3-65 is in one piece and numbered 31-49
In my kit this piece is lasered in 2 pieces and isn’t numbered, is this correct or am i missing something.

IMG_1367.png

IMG_1364.jpeg
 
Rombout said:
I’m in the process of building this kit.
Have a question
In the manual part part no cl 3-65 is in one piece and numbered 31-49
In my kit this piece is lasered in 2 pieces and isn’t numbered, is this correct or am i missing something.

View attachment 624144

View attachment 624145
Click to expand...
Hi,
The clamp CL3 is similar to the inner planks, on a real ship, they aren't one whole strip but are segmented. To facilitate future handling and working, we designed it as a whole strip, but it can be segmented by cutting the tabs finally. So please don't worry about this, you haven't missed anything. You just need to process it follow the instructions in the manual for working the inner planks: drilling holes, fitting treenails, and then glue the clamp in place.
 
Cathber said:
Bonjour, merci pour les tutoriels de montage.

Avez-vous prévu un tutoriel vidéo pour l'assemblage des mâts ?
Click to expand...

I think there will be not video tutorials for masts; even if there are, they will be updated very slowly.
 
You must log in or register to reply here.
Back
Top