clamps for planking a POB-hull - no drilling or holes

[Uwek]

I found these clamps interesting - especially these do not need any holes etc.

Spantenzwinge

Beplankungshilfe- Spantenzwinge Plankenklemme Ideal für starke Planken die unter hoher Spannung am Rumpf angebracht werden sollen. Die Zwingen…

www.schiffsmodelle-shop.de

 

[Uwek]

The only problem could be at the bow where the plank shoul be fixed in a curve - here one of these pins should be somehow movable

 

[mgdawson]

here one of these pins should be somehow movable

Perhaps slip a wedge between the pin and the plank.

Mark

 

[Uwek]

Perhaps slip a wedge between the pin and the plank.

Mark

good point - this will be the solution
BTW: A warm welcome here on board of our forum

 

[Kurt Konrath]

I think it is Micro-mark sells two sizes of this style clamp but made of wood.

Planking Clamp Set | Model Shipbuilding Tools & Supplies | Micro-Mark

This 10-piece planking clamp set is essential for ship modelers. Holds wood strips in place securely while shaping or gluing curved hull structures.

www.micromark.com

I have bought both sizes and assembled them but not had a chance to use them yet. Ok

 

[Short John Bronze]

Holes, pins, etc are not an issue with first stage planking where clamps like this would work - they get covered up at the second stage. These clamps would not work at the second stage when the bulwarks are not exposed - unless one did both layers progressively in sync.

 

[Mike Dowling]

I got some of those from micromark. They are not worth the money as they don't screw in at all well. Where did you get those blue ones from ?

 

[Mike Dowling]

Sorry, I found the link you put on - silly me!!!

 

[BarrySR]

I found the best clamps to use when planking over a solid hull or the outer planking of a double planked hull are push pins. They are cheap and plentiful.

 

[OlivierF]

I think it is Micro-mark sells two sizes of this style clamp but made of wood.

Planking Clamp Set | Model Shipbuilding Tools & Supplies | Micro-Mark

This 10-piece planking clamp set is essential for ship modelers. Holds wood strips in place securely while shaping or gluing curved hull structures.

www.micromark.com

I have bought both sizes and assembled them but not had a chance to use them yet. Ok

I got a set of these and was disappointed as they did not screw in to the frame very well and just split the wood. They’re in a box somewhere if I haven’t tossed them…

 

[Signet]

I really hadn't thought about it before now, but filling in with scrap wood between the bulkheads, as recommended by many including Olga in her Ragusian Carrack series of videos, prevents use of any planking clamp that depends on clamping to the bulkhead. I'll really have to consider the pros and cons of such filling before beginning construction.

 

[Bill-R]

I found these clamps interesting - especially these do not need any holes etc.

View attachment 345450 View attachment 345447

View attachment 345448 View attachment 345449

View attachment 345451

Spantenzwinge

Beplankungshilfe- Spantenzwinge Plankenklemme Ideal für starke Planken die unter hoher Spannung am Rumpf angebracht werden sollen. Die Zwingen…

www.schiffsmodelle-shop.de

Hello Uwek,

I like these clamps. They look to be very functional. They also have a very good price.

Bill

 

[piter56]

Stl file for printing

 

[Jimbo]

Hello Uwek,

I like these clamps. They look to be very functional. They also have a very good price.

Bill

Went to the website and cannot see how I can have these shipped to UK ( Scotland ) does anyone know where else I can purchase these ?

 

[geowbre]

I have found that model railroad spikes make perfect clamps. You just pull them out after the glue dries.The little hook on spike hold the plank.