• Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
  • PRE-ORDER SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR FIRST ISSUE WILL BE JAN/FEB 2026

Good afternoon

Joined
May 31, 2025
Messages
16
Points
13

Thirty-odd years ago, I purchased a Billings 1:96 kit and promised my wife a wonderful decorative artefact. Unfortunately, life intervened, and we have enjoyed a wonderful working life and a busy retirement. Last year I decided to locate the 'Billings' from its garage tomb. I found the remains decayed to an extent that encouraged me to seek the blessings of the wife/bank manager/and now Admiral to purchase a new kit, which duly arrived last March - a Billings 1:75 kit of the same boat (Cutty Sark). And so it began.....

Nine months later, I decided that my prior experience, upon which I had relied to proceed with the build with vigour, haste, and total naivety, would serve me in good stead. It didn't! I proceeded, knowingly having made some (many) critical errors, to the start of the running rigging and...well, I dismantled the lot....and....bought another kit!

So, that is my introduction (confessioni I guess), as I start again on my Billings 1:75 - albeit now with the benefit of the Internet and access to this hoard of wonderful knowledge on strategy, tactics and technique (further confession, I am ex Army and need to learn the language of the sea in addition to everything else). My dad was a marine engineer and my great-grandfather a ship's carpenter - must be in the 'jeans' [sic].

In sum, greetings from a septuagenarian Scotsman living in the North of England who is humbly grateful for the information available on the site.

the latest venture.JPG
 
Welcome to the forums ! I'm glad you didn't give up due to your rough weather starts. :)
I also do not come from a sea faring family and am still working on learning the lingo. In my youth, I was much more aviation oriented (and still love aircraft too).
Looks like you have a nice, smooth hull surface there and it looks like you have filled the space between the bulkheads which many people do. You have a fine start.
 
Many thanks, Jeff. I purchased a Billings 'slip' and did my best to get square fitting on the ribs (my last effort was not fully symmetrical), and this appears better. I used balsa for the filling, and though it is coming along nicely, it is a beast to work with - albeit that I altered technique to substantially shape the blocks before installation (I tried to cut/sand the first few after they were glued in situ - typical army pioneer approach!). But I am happier this time. I envy your 'aviation' interest - I had thoughts on building a 'chopper' but never got round to it.
 
Welcome to SoS Jack! Never too late to get back into the hobby. :) I anxiously await my first trip to your part of the world in May for a week of golf in St. Andrews and Dumfries with my golf pals. Happy Days!!!

Allan
 
Welcome and please start a build log so we can follow along.

Have fun looking into the forum for help and use the search tool to check what others have done with this model.
 
Welcome to SoS Jack! Never too late to get back into the hobby. :) I anxiously await my first trip to your part of the world in May for a week of golf in St. Andrews and Dumfries with my golf pals. Happy Days!!!

Allan
About the only time it would be too late to get back into the hobby is after you have been introduced to Peter the gate guard!
 
Welcome to SoS Jack! Never too late to get back into the hobby. :) I anxiously await my first trip to your part of the world in May for a week of golf in St. Andrews and Dumfries with my golf pals. Happy Days!!!

Allan
Good luck with the accents. St Andrews is a lovely place, and a fantastic course...but its in the Kingdom of Fife...inhabited by the 'Fifers' who have a vocal twang that will stretch your eardrums. In all other respects they are the most welcoming people...just ask the price if they welcome you in for 'a cup of tea'. ;) As for the hobby, it's much more serious than that. She who must be obeyed has waited many years, but I intend, on this occasion, to take my time and do it in a manner fit for this fine site. Have a great time in Scotland.
 
Thanks for warning. A friend originally from Dumfries is hard enough to understand after a couple fingers of Scotch whisky so St. A's should be even more fun :)
Thanks again!
Allan
On your travel to St Andrews, you are likely to pass through Dundee. Most people might give it a miss, but in May 2026 I believe there will be Tall Ships in port on some dates.

1769025471907.png
 
I shall indeed. Many thanks for the welcome Kurt.
Kurt, your post caught me deep in thought mode regarding how to proceed with planking of the hull. Although I have 'planked the CS' on two previous occasions with fair results, I want to do it better, and for that reaso,n I constructed the frames on the keel, using a Billings 'slip' and then filled the spaces with balsa. I am reasonably happy with where it is, but after looking through some of the build logs, I am drawn towards a planking plan that would require the frame extensions above the deck to be removed after most of the planking was complete, but prior to the installation of the rails. (if that makes sense)

I picked up on the idea from a build log by Domcee and I shall make further enquiries to see if I am interpreting the process correctly. I do not have the skills to mill the decorative inserts that are seen above the rails, but I can live with that finished in plain wood.

In sum, having had one failed attempt and one 'almost' on the CS I shall take my time and start a build log when I have decided on a route map. Thanks again for your welcome note and very best regards.
Jack
 
Welcome to the SOS Group. I know how it is to have the Admiral apply pressure over several years to build a specific vessel for her. Mine was a scratch built model of the Bluenose to celebrate the 100th anniversary of the ship. Task completed, it's been smooth sailing ever since.
 
Welcome to the SOS Group. I know how it is to have the Admiral apply pressure over several years to build a specific vessel for her. Mine was a scratch built model of the Bluenose to celebrate the 100th anniversary of the ship. Task completed, it's been smooth sailing ever since.
I am certain all these Admirals are very special people...motivators and in my case, a bank manager. :)
 
Back
Top