Le Coureur 1776 1:48 by CAF Kurt’s Build

Kurt Konrath

Kurt Konrath
Joined
Feb 11, 2020
Messages
4,379
Points
588

Location
Oklahoma City OK
Ok this is the beginning of my build log.

I expect this build to take a year or more as I must wait to clean my workshop of other in work projects before getting along with this ship build

I am starting with the ships boat first as you will see, a project in itself!
 
Ok so here we begin on the cutter as it’s called on the box.

Included in the Le Coureur Kit was a ships boat kit from La Salamandre also in 1:48 scale.

image.jpg

So when you open the small box you get a nicely wrapped kit and simple instructions for the build.

First is the build of the Mini-jig to assemble the cutter.

3A85500F-8A58-4348-809B-B35BDBA9E00A.jpegAFDB0D52-A74C-4D5F-B029-79021EEC6B0A.jpeg
BBEFDF14-EF46-4A85-80CB-3D225F993503.jpeg

A simple six sided box that glued together well with slot and tabs that only mate up one way!

I glued sides to bottom but left top loose for easier removal!

Next up is the keel which sits in slots in base board.

Kurt
 
Hallo Kurt, alias @Kkonrath
we wish you all the BEST and a HAPPY BIRTHDAY
Birthday-Cake
we all hope, that you will have some time to work on your lugger
 
Happy Birthday, Kurt! Birthday-Cakefrom good old Germany.
I would love to take a good holiday in good ole Germany. I was born there when my father was in USAF at Bittburg AB.

My mother is from Wiesbaden area, but I have never been able to go visit family or see the land. My only trips in country were on travel layovers at old Rhien Main AB when I was active duty USAF!
 
Back
Top