Looking for where to purchase tiny nails with a round head with a square-pointed end?

[shota70]

Hello my dear friends
I am asking for your help in locating an online store where you can purchase tiny nails with a round head along with a square or pentagonal end.
I am not looking for a round head alone or a square or pentagonal head alone, but a head that combines both shapes together.
I am attaching a picture of the model that our friend Marslav is building for illustration.

 

[shota70]

Hello my dear friends
I am asking for your help in locating an online store where you can purchase tiny nails with a round head along with a square or pentagonal end.
I am not looking for a round head alone or a square or pentagonal head alone, but a head that combines both shapes together.
View attachment 549999View attachment 550000View attachment 549999View attachment 550000I am attaching a picture of the model that our friend Marslav is building for illustration.

This is the result of my own work, I will try to improve the result by manual milling using a Proxon MF70.

 

[kuba91nt]

100pcs Shoe Tacks/Nails 10-25mm Square Shank 1.1mm dia. For Lasting, Repairs. Tiny. Small - AliExpress 13

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

Dear Shota, best way is a small, square shoe nail. You cut them in half, then trim the tip. They come in different sizes, some taper towards bottom, so you can make different diameters.

 

[shota70]

100pcs Shoe Tacks/Nails 10-25mm Square Shank 1.1mm dia. For Lasting, Repairs. Tiny. Small - AliExpress 13

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

Dear Shota, best way is a small, square shoe nail. You cut them in half, then trim the tip. They come in different sizes, some taper towards bottom, so you can make different diameters.

thank you very much for your guidance and respond

 

[shota70]

This is the result of my own work, I will try to improve the result by manual milling using a Proxon MF70.View attachment 550012View attachment 550013View attachment 550014

And here are the nails after the browning process next to a nail in its original state

 

[kuba91nt]

In square nails, to avoid making too large a hole in the wood, you'll have to round off the bottom with a file. Fortunately, there aren't many nails on the ship, so this type of work is fine. Maybe someone else has some ideas.