Making a capstan - by Igor Capinos

zoly99sask

Administrator
Staff member
Administrator
Forum Moderator
Joined
Apr 13, 2015
Messages
7,793
Points
738

Location
Saskatoon,Canada
Courtesy of - Igor Capinos, Poltava , Ukraine

Fabrication of the capstan with the use of a lathe and mini milling machine

cab1.jpgcab02.jpgp.gif
Proksonovsky holder for clamping the drill in a lathe

cab03.jpg

As a divider head, a lathe chuck is used, on which marks are placed. The cartridge is fixed by the vise that holds the pulley​


cab11.jpgcab04.jpgcab05.jpgcab06.jpgcab07.jpg

Calculation of the displacement of the mill to obtain the correct shape

cab08.jpgcab09.jpgcab10.jpg

 
A very interesting way how Igor is doing this, especially his way to fix the spindle of his lathe, especially ig he has to make several working steps to cut one notch.
Definitely the results is looking realy good.......thanks Zoly for sharing with us this method
 
Back
Top