• LUCZORAMA SHIPWRECK SCAVENGER HUNT GIVEAWAY. 4 Weeks of Fun • 1 Legendary Prize ((OcCre’s Fram Ship)) • Global Crew Welcome!
    **VIEW THREAD HERE**

New Resin Printer Vendor

W

warren47

Joined
Sep 7, 2024
Messages
108
Points
88

Location
Edmond Oklahoma
I recently ordered the 74 cannons needed by my Bellona. I purchased them from SgtTaz. I provided the 4 assorted STL as provided by the National Maritime Museum, Greenwich. SgtTaz provided 74 perfect cannons. Even the bores are round. I won't discuss pricing but will say they were very reasonable .
EDIT:
email address has been moved. contact me by PM if you would like the contact information.
warren

IMG_6927.JPG
 
Last edited:
warren47 said:
STL as provided by the National Maritime Museum, Greenwich
Click to expand...
There is a full set of STLs at the following site. Taz can work with these but it is best to give him the OVERALL length that you want, not the designated length as the designated length did not include the breech rings and cascable. For example a 9 foot gun was closer to 10 feet long over all.

Warren you may want to take down his email address as posting an email address on sites like this create a lot of spam and other unwanted junk. I speak from experience. :(

Just as an FYI Taz's prices are VERY reasonable compared to the often used suppliers like Syren. For example from Syren,,,,
For black #D resin printed Armstrong Frederick guns 1 11/64 long (29mm) as an example, a pack of 4 each barrel is $1.93 no including shipping.

Taz - $0.67 each, including shipping for the same size. Larger barrels will cost a few cents more due to using more materials and taking longer to print.

Allan

List of STL drawings for guns.
https://thenrg.org/page-1075420
 
Last edited:
AllanKP69 said:
There is a full set of STLs at the following site. Taz can work with these but it is best to give him the OVERALL length that you want, not the designated length as the designated length did not include the breech rings and cascable. For example a 9 foot gun was closer to 10 feet long over all.

Warren you may want to take down his email address as posting an email address on sites like this create a lot of spam and other unwanted junk. I speak from experience. :(

Just as an FYI Taz's prices are VERY reasonable compared to the often used suppliers like Syren. For example from Syren,,,,
For black #D resin printed Armstrong Frederick guns 1 11/64 long (29mm) as an example, a pack of 4 each barrel is $1.93 no including shipping.

Taz - $0.67 each, including shipping for the same size. Larger barrels will cost a few cents more due to using more materials and taking longer to print.

Allan

List of STL drawings for guns.
https://thenrg.org/page-1075420
Click to expand...
Taz was ok with me posting contact info
 
You must log in or register to reply here.
Back
Top