Polacca-Sciabecco franceze Mistique

Mr.Deep

Well-Known Member
Joined
Nov 25, 2018
Messages
28
Points
68

Hi everyone. I’ll continue building the model. I choked the nagel on the deck. I drilled holes in the sides. I started to hammer the nagh in the sides. I sanded the underwater part of the hull and covered it with an oak stain.IMG_20191209_155822.jpgIMG_20191209_155835.jpgIMG_20191209_155933.jpgIMG_20191209_155947.jpgIMG_20191209_160000.jpgIMG_20191209_160004.jpgIMG_20191209_160020.jpg
 

Mr.Deep

Well-Known Member
Joined
Nov 25, 2018
Messages
28
Points
68

hi guys.I will continue the story of the construction of the Misticque.Changes little,because of illness,hernia of the spine in the neck.My hand is numb.So far, this is what the model looks like.I'm being treated.Painted the bulwark and bulkhead inside.Set the hatch and bollards.I started making carriages.I'm waiting for a package from Amati with all the little things.

IMG_20200108_122642.jpg

IMG_20200108_122650.jpg

IMG_20200108_122702.jpg

IMG_20200108_122709.jpg

IMG_20200108_122719.jpg
 

Mr.Deep

Well-Known Member
Joined
Nov 25, 2018
Messages
28
Points
68

I continue construction.The hand moved a little after the illness.Now I'm working on the guns that are under the deck of the quarterdeck.You must first install them, tie them with tails.Then I'll cover the quarterdeck.IMG_20200220_114212.jpgIMG_20200220_114225.jpgIMG_20200220_114234.jpgIMG_20200220_114247.jpgIMG_20200220_114257.jpgIMG_20200220_114329.jpgIMG_20200222_123830.jpgIMG_20200222_123820.jpg
 
Last edited:

Mr.Deep

Well-Known Member
Joined
Nov 25, 2018
Messages
28
Points
68

Hi, everybody.That's what I get.I tied the blocks with tails, put buckets in imitation of water.IMG_20200228_133403.jpgIMG_20200228_133411.jpgIMG_20200228_133454.jpgIMG_20200228_133850.jpgIMG_20200228_133907.jpgIMG_20200228_133931.jpgWe'll have to hide all this beauty under the deck of the quarterdeck.Tell me. can the framework with cannonballs still be installed?
 

Mr.Deep

Well-Known Member
Joined
Nov 25, 2018
Messages
28
Points
68

Hello.I started installing the decor on the stern.But I don't have enough of it.They are not available on the Cornwall site.when they will not know.In connection with the coronavirus, everything stood up.All health.IMG_20200331_131624.jpgIMG_20200331_131511.jpgIMG_20200331_131624.jpgIMG_20200331_131511.jpgIMG_20200331_131420.jpgIMG_20200331_131429.jpgIMG_20200331_131434.jpgIMG_20200331_131442.jpgIMG_20200331_131505.jpg
 

Mr.Deep

Well-Known Member
Joined
Nov 25, 2018
Messages
28
Points
68

I have a question.Is the rooster grating on the stern too small?Made a 1x1 mm cell..Is it normal for a 1:50 scale?
 
Top