Pressure sensitive stickers

[Marty Olsen]

Does anyone have a source for custom made pressure sensitive stickers? My current build is a dive boat and I would like to put "Diver Down" stickers on the hull sides. It cannot be larger than 1 1/2" by 1 1/2" or the bottom of the sticker will be below the water line. So far I've only contacted one manufacturer and they don't make anything smaller than 9 1/6"

Thanks

 

[Namabiiru]

Marty,
Inkjet printable decal film is available online and probably work very well, but I’m sure there are sheets of self-adhesive stuff as well. Honestly, though, diver down flags are so simple, I’d just mask and airbrush it.

 

[AllanKP69]

The below is a quick drawing with flags that are each about 1" X 1.5" Is this what you are looking for? You can get some 8.5"X11" label paper at any office supply store or Amazon. https://www.amazon.com/s?k=Label+paper+8.5X11&crid=267766JUNGYFH&sprefix=label+paper+8.5x11,aps,245&ref=nb_sb_noss_1
Download the drawing and print it on a sheet of label paper with your home printer, cut them out, peel the backing off and stick on the boat. If you have a CAD program I can send it to you as a DXF or DWG drawing. Caveat, if this is not what you are looking for, sorry for any confusion...........

Allan

 

[AllanKP69]

In looking at photos of dive boats I saw a lot of flags on the dive boats but no placards and such on the hull. Maybe I am misunderstanding what you are going for. If a flag, that can be another little fun project. If you change and go with a flag, silk span is great for making flags an can be made to drape down naturally.
Allan

 

[Namabiiru]

They’re not common, but they’re out there.

 

[AllanKP69]

They’re not common, but they’re out there.

Thanks for posting the photo Draft . I think printing the drawing on to label paper or decal paper as you posted in #2 will work fine.
Allan

 

[Marty Olsen]

The below is a quick drawing with flags that are each about 1" X 1.5" Is this what you are looking for? You can get some 8.5"X11" label paper at any office supply store or Amazon. https://www.amazon.com/s?k=Label+paper+8.5X11&crid=267766JUNGYFH&sprefix=label+paper+8.5x11,aps,245&ref=nb_sb_noss_1
Download the drawing and print it on a sheet of label paper with your home printer, cut them out, peel the backing off and stick on the boat. If you have a CAD program I can send it to you as a DXF or DWG drawing. Caveat, if this is not what you are looking for, sorry for any confusion...........

Allan

View attachment 537071

Perfect. Thank you

 

[pay2700]

Here is another thought. The website makestickers.com. Cheap, online ordering, fast and accurate. I ordered the scrollwork for the
Emma C, Berry. I cut out the scrollwork from the plans in black and white, mounted on white paper, took a photo, imported into word file, trial and error to get the right size, downloaded to makestickers.com, specified the colors, they sent a sample for approval. The whole order was $11.60. For those who do not have a color printer this was quite easy.