Rigging parts

[JoeF]

Rigging parts for the HM Bark Endeavour. I have missing parts of the parrel ribs 6mm and deadeyes 7mm. If anyone have some spares please sens me a pm and let me know the price for them. Thanks Joe

 

[Corsair]

Who's the kit maker?
If its Occre, contact their customer service and they will send them to you.

 

[JoeF]

Hi Jeff, The endeavour is from Eaglemoss

 

[paul ron]

check the model suppliers, they carry blocks n dead eyes. you dont need the parts from the kit... you can upgrade your parts this way as well. start kit bashing n scratch building, cut the umbilical cord.

 

[Roger Pellett]

Parrel ribs should be easy to make.

 

[Steviedean]

Not sure if this the right place to ask this but, has anyone built Mamoli's kit of the America 1851?
Besides the difficult to shape plywood bulkheads, in the stern, bulkhead #15 the last one, the shape just doesn't seem correct.
The first planking will not conform to that bulkhead if it conform to the prior bulkhead #14.
Plus, wear is part #23? It's non existent.....
Just wondering if anyone had that problem....
Thanks!
Steve.

 

[TheGatzby]

@Steviedean

You might consider starting a new topic named " America kit from Mamoli " in This category.
If you could provide some pictures it would be helpful.

I have the Mamoli kit, but not built. I also have the plans from Model Shipways.
I will try to see how I might help.

Just off the top of my head, there appears to be a lot of fairing that needs to be done in that area.


Here is an image from the Model Shipways instructions.
Instructions for the Model Shipways kit are available here:

https://cdn.shopify.com/s/files/1/0653/3274/0198/files/MS2029_AMERICA_INSTRUCTIONS_NEW_PHOTOS_compressed.pdf?v=1759778617