You are so nice Jim. Thanks
Spanish Longboat - Falua - By Schrader 1:25 - Plans By Isidro Rivera
Very good execution - very well done 
Yesterday I started to work in the different floors. The stern floor
Two important messages
Two important messages
- The boat reality is different to the plans
- The decoration according with this reality is out of scale.
Hello all
After reviewing the Compass Rose, i realized that:
With the same idea I install a liz flower in the back of the officers place
As well as the bench floor frame
After reviewing the Compass Rose, i realized that:
- The color contrast is not good
- The size is going to be a problem in the future
With the same idea I install a liz flower in the back of the officers place
As well as the bench floor frame
But......
Not everything is going smooth....... I found this big mistake
This need to be corrected. With Heat, water and a little vises ...... this was the result
Not everything is going smooth....... I found this big mistake
This need to be corrected. With Heat, water and a little vises ...... this was the result
Let's start with the stern benches. These have an special form. So I decided to build like a "mold" 
I duplicated them, creating a back support for the little placks.
Using the same template, I built the top of them
I duplicated them, creating a back support for the little placks.
Using the same template, I built the top of them
This is the final result including the little top with hinges that eventually work!!!!!
This "Falua" has a little shield in the back side of the rudder (?? is this the right word?). Its form is curved.
So to fix it, I went attaching to pieces of basswood and made the cuts.
With the cylinder sanding tool I gave it the curve form
Attached to its place
So to fix it, I went attaching to pieces of basswood and made the cuts.
With the cylinder sanding tool I gave it the curve form
Attached to its place
Attachments
Here we are again
Time not coming back but advances have been made
After 6 attemps, the final benches were in place
Time not coming back but advances have been made
After 6 attemps, the final benches were in place
An finally the Oars
Very nice build Hellmuht. I also make oars the same ways as you. 
great!!! you put two lines instead of one. yours are even more complicated
This way I was trying to identify them as different pairs
Now the tent
This is looking great - we would have nothing against, to see more often posts showing your progress
- Joined
- Aug 16, 2019
- Messages
- 870
- Points
- 343
Ok that is master work
Today I'll show you how I made "The Pedrero"
First.... I made it in wood. This is going to work to form the mold
Second....... I use Clay to make the first half
Posted Friday at 10:54 AM
G
Good Morning
Today I'll show you how I made "The Pedrero"
First.... I made it in wood. This is going to work to form the mold
Second....... I use Clay to make the first half
Third........ I use high temperature Silicone..... The firs half is ready.
I use the first half to replace the clay and repeat the process to make the second half. With a really sharp knife I do the little channels to evacuate the air at the time of the foundry.
As demolding agent I use a common powder.
The the foundry using a pewter kind metal
Aging Process
With a provisional masts installation this is how it looks so far
First.... I made it in wood. This is going to work to form the mold
Second....... I use Clay to make the first half
Posted Friday at 10:54 AM
G
Good Morning
Today I'll show you how I made "The Pedrero"
First.... I made it in wood. This is going to work to form the mold
Second....... I use Clay to make the first half
Third........ I use high temperature Silicone..... The firs half is ready.
I use the first half to replace the clay and repeat the process to make the second half. With a really sharp knife I do the little channels to evacuate the air at the time of the foundry.
As demolding agent I use a common powder.
The the foundry using a pewter kind metal
Aging Process
With a provisional masts installation this is how it looks so far
Great casting tutorial of "The Pedrero", Hellmuth! I guess, "The Pedrero" is the name for this type of swivel gun? Many, many thanks for sharing!
I guess, "The Pedrero" is the name for this type of swivel gun? Many, many thanks for sharing!