did till now couple no name sail boads (raw boat ,cutter like one,some modern like with engine ,and pinto ,santa maria still in works missing plans for it ,ones i got are copy of copy and last 3 plans are like washed up nothing is wissible so i quit and give all) )from some poland kits (was cheap to buy them but q is super low compared to these u guys build)
anyhow ,,i decide to build one from plans only (rn uss constitution1798 from model shipways ,hms bellona or victory if i find good plans are look good
)
so question i would need to make parts so need wood ( wood is not problem we got a load of woodworkshops around) to be cut .
i read and read ,and came to some conclusions i think , to buy band saw Record BS300e
thinking i will need somewhat larger cut ,and ppl say it is ok 12'' band saw ..
now questions , do i need large saw like this ?
idea is to buy linden tree plank and recut it in slices for ship parts ,and use for first hull 2mm veneer and pretty 0.6-0.8mm for final
ugh i made error on subject .. i read for these 2 bandsaws and decide to record 300e ,and write erong one ..
anyhow ,,i decide to build one from plans only (rn uss constitution1798 from model shipways ,hms bellona or victory if i find good plans are look good
) so question i would need to make parts so need wood ( wood is not problem we got a load of woodworkshops around) to be cut .
i read and read ,and came to some conclusions i think , to buy band saw Record BS300e
thinking i will need somewhat larger cut ,and ppl say it is ok 12'' band saw ..
now questions , do i need large saw like this ?
idea is to buy linden tree plank and recut it in slices for ship parts ,and use for first hull 2mm veneer and pretty 0.6-0.8mm for final
ugh i made error on subject .. i read for these 2 bandsaws and decide to record 300e ,and write erong one ..