Want to buy 3D printed Jack Sparrow and other figures

[Grex110]

Where can I buy pirates of the Caribbean figures for my Black Pearl model. The scale is 1/41 ZHL Model.
A few figures came with the kit but I’m looking Jack Sparrow, Barbossa, and others… Looks like they need to be
about 30 to 35mm ( 1.25 inch ) tall. Thanks..

 

[Herbs Ships]

Here is a likeness…any thin areas will be subject to easily breaking off…like swords, fingers, etc. I would have to make one first before I can commit.

 

[Herbs Ships]

If the person is 5’10”, then the figure would be 43-44mm tall. Check your numbers again…lmk if you believe the figure should still be 30-35mm tall.

 

[Grex110]

Looks like the ones that came with the ship may have smaller than 1/41 scale of the ship. So to keep them uniform I would still need them close to 35mm. The sample pix shows the size, if that helps.

 

[Herbs Ships]

No problem. I will be able to print in about 3 to 5 days as I recently did an upgrade that needs 72 hours to cure. Hopefully everything is good and I can see what I can get.

 

[Herbs Ships]

Here is another likeness…
.

 

[Herbs Ships]

Couple more

 

[Naima]

Pretty cool , are there sets of 1/75 or 1/72 pirate crews? mostly pirates from 1650 to 1715 that are operating on ship ?

 

[Herbs Ships]

Pretty cool , are there sets of 1/75 or 1/72 pirate crews? mostly pirates from 1650 to 1715 that are operating on ship ?

I can make them….depends on what poses you want, some care easier to make than others…but I will work with you. This is a family of pirates that he purchased. The ones you see here are 1/50 scale. No problem making 1/72 or 1/75…the fishermen are 1/75. So what form would you like to see? Are youn located in Italy? If so, what town/city? Regards, Herb