Re: Royal William 1/48 scale

[neptune]

I also managed to secure the emergency steering chains in place,



.

 

[shota70]

View attachment 573388
I also managed to secure the emergency steering chains in place,

View attachment 573389

.

magnificent work

 

[neptune]

magnificent work

Thank you so much for the lovely comment,

best regards John.

 

[neptune]

Continuing with the lanthorns the three of them have scrolls each side of the connecting rod, I have not seen these on other Period ships, the only thing I can think is that they are a platform for the sailors to stand on when lighting or maintaining the lanthorns.


First attempts,



I should have soldered these on before attaching the actual lanthorns themselves, but now I jusst CA glued them in place and bound them with some very fine copper wire,



close up view, still have to tidy up the binding copper wire,


My supply of copper wire,



view from above,



and from under,



and on the Period model,


best regards John.

 

[neptune]

Its been awhile since I last posted so this is a bit of a catch up,


I drilled and fixed eye bolts to the lanthorns and also the transom, this pic shows the measuring for the attaching wires,



After attaching the wires,



and several views of the attached lanthorns,








thanks for looking in,
best regards John,
.

 

[neptune]

the molds for the anchors dusted with talcum powder,



and the anchors after casting, they need a bit of a clean up,



after a bit of filing and also with the rings attached,

best regards John.

 

[neptune]

Whilst I was casting the anchors I decided to also cast the Dolphins for the stand at the same time, this is the open mold for the Dolphins,



And after casting, I have already removed the clamps from the mold,



and the open mold with the cast Dolphin,



Still have to cut off the sprue and clean them up a bit,



This is how it will sit, only it will be on the cradle that supports the ship,



and the four Dolphins in front of one part of the cradle,

best regards John.


.

 

[RogerD]

That mold work is very impressive John, particularly those dolphins.

 

[Kurt Konrath]

Making molds is not hard if you have a wax master to use, old jewelry process called lost wax casting.

Fun part is coming up with the design to make the wax originals for use. If you had a plastic original you could use it to make a mold for making the wax casting.

 

[RichardG]

Very nice work.

 

[shota70]

very impressive work!!

 

[Stevedownunder]

Hi John,
Lovely work, I do like the casting.

Cheers,
Stephen.

 

[AllanKP69]

Making molds is not hard if you have a wax master to use, old jewelry process called lost wax casting.

That would make a terrific thread on "how to" in the Tricks of the Trade" subject here at SoS. LOVE the dolphins!