• Ships of Scale has incorportated an extra level of security when you log In. Please follow on-screen prompts to acknowledge that you are not a robot via a "Check Box" or a "Pictorial Check Box Puzzle". This is needed due to higher level of AI Activity Security.
  • SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE July/August 2026
  • Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

2026 Frigate Dom Fernando II e Glória - Revel 1:200 kit 05413

Joined
Aug 20, 2023
Messages
12
Points
48

For our 30th wedding anniversary in 2026 we started planning a vacation to Portugal. During the early stages of planning our trip to Lisbon I learned of the Frigate Dom Fernando II e Glória. This frigate was last exclusively sailing warship of the Portuguese Navy and the last vessel that made the so-called "India Run", a route connecting Portugal to its old possession in India.

In 1938 she was re-designated as the Flagship of the Congenital Naval forces of Portugal and served this noble role until 1963 when on 3rd of April tragedy struck. While undergoing restoration and general repair a massive fire broke out on board the ship, despite hours of valiant fighting by the Portuguese Navy, Firefighter’s, and the Cadets/students aboard the Dom Fernando II e Glória was reduced to a burnt-out hulk with very little left above the waterline (although many fittings were saved by firefighter’s, 3 of which refused to leave the burning ship without the National Flag that was flying from her main mast). Several days later the wrecked hulk of what was once Dom Fernando II e Glória was towed to an area of the River Targus where she would not impede navigation. The hulk of Dom Fernando II e Glória was then abandoned and left to rot in the mudflats for nearly 29 years, alone and almost forgotten by all except a few.

In October of 1990 both the Portuguese Navy and the National Commission for the Commemoration of the Portuguese Discoveries began efforts to salvage and restore the hulk of Dom Fernando II e Glória. These efforts were a major success and on January 22nd, 1992 Dom Fernando II e Glória was refloated and placed on a floating drydock. Restoration would take around five years to complete and was done with the utmost care and attention to historical detail, many of the fittings salvaged during the 1963 fire were brought back aboard and reinstalled. By 1997 the ship was mostly restored and left drydock.

On the 27th of April 1998 the Dom Fernando II e Glória was officially reinstated as the ceremonial flagship of the Portuguese Navy and was received a navy designation as UAM 203. In 1998 she was brought to Lisbon and partook in Expo 98 as a symbol of Portuguese accomplishment in naval exploration. Today the Dom Fernando II e Glória is not just a museum ship, but it also hold two great honors one of which is being the fourth oldest armed frigate, and the eight oldest sailing warship in the world and the other is the fact that her restoration is considered to be “one of the most astonishing historic ship preservation achievements of our time” by the former World Ship Trust.

Upon learning its history I grew very excited at the opportunity to visit this historic tall ship and of course, as I had done after visiting the schooner Bluenose back in 2023, build a model of it. I had my next project! (Perhaps others have visited Frigate Dom Fernando II e Glória as well)

I immediately started sourcing photos plans and started looking for kits that were available. In April 2026 I sent out a message on SHIPS OF SCALE looking for assistance in locating a discontinued kit that Revel produced back in 2010. I quickly received a lead from a fellow Ships of Scale member Corsair from Homosassa, Florida saying there was one available on Ebay. I had the kit in hand in a couple of weeks and kept it in my den awaiting the return from our visit to Lisbon and visit to the Fragata D. Fernando II e Glória. Thanks Corsair!

We had a wonderful trip to Portugal and I took over 150 reference photos for my second build.

I also found that google maps has a great complete full walk through tour of the ship that I could use as a reference. Enjoy!


Let the modeling begin ....
IMG_6862.JPGIMG_6858.JPGIMG_6776.JPG
 
For our 30th wedding anniversary in 2026 we started planning a vacation to Portugal. During the early stages of planning our trip to Lisbon I learned of the Frigate Dom Fernando II e Glória. This frigate was last exclusively sailing warship of the Portuguese Navy and the last vessel that made the so-called "India Run", a route connecting Portugal to its old possession in India.

In 1938 she was re-designated as the Flagship of the Congenital Naval forces of Portugal and served this noble role until 1963 when on 3rd of April tragedy struck. While undergoing restoration and general repair a massive fire broke out on board the ship, despite hours of valiant fighting by the Portuguese Navy, Firefighter’s, and the Cadets/students aboard the Dom Fernando II e Glória was reduced to a burnt-out hulk with very little left above the waterline (although many fittings were saved by firefighter’s, 3 of which refused to leave the burning ship without the National Flag that was flying from her main mast). Several days later the wrecked hulk of what was once Dom Fernando II e Glória was towed to an area of the River Targus where she would not impede navigation. The hulk of Dom Fernando II e Glória was then abandoned and left to rot in the mudflats for nearly 29 years, alone and almost forgotten by all except a few.

In October of 1990 both the Portuguese Navy and the National Commission for the Commemoration of the Portuguese Discoveries began efforts to salvage and restore the hulk of Dom Fernando II e Glória. These efforts were a major success and on January 22nd, 1992 Dom Fernando II e Glória was refloated and placed on a floating drydock. Restoration would take around five years to complete and was done with the utmost care and attention to historical detail, many of the fittings salvaged during the 1963 fire were brought back aboard and reinstalled. By 1997 the ship was mostly restored and left drydock.

On the 27th of April 1998 the Dom Fernando II e Glória was officially reinstated as the ceremonial flagship of the Portuguese Navy and was received a navy designation as UAM 203. In 1998 she was brought to Lisbon and partook in Expo 98 as a symbol of Portuguese accomplishment in naval exploration. Today the Dom Fernando II e Glória is not just a museum ship, but it also hold two great honors one of which is being the fourth oldest armed frigate, and the eight oldest sailing warship in the world and the other is the fact that her restoration is considered to be “one of the most astonishing historic ship preservation achievements of our time” by the former World Ship Trust.

Upon learning its history I grew very excited at the opportunity to visit this historic tall ship and of course, as I had done after visiting the schooner Bluenose back in 2023, build a model of it. I had my next project! (Perhaps others have visited Frigate Dom Fernando II e Glória as well)

I immediately started sourcing photos plans and started looking for kits that were available. In April 2026 I sent out a message on SHIPS OF SCALE looking for assistance in locating a discontinued kit that Revel produced back in 2010. I quickly received a lead from a fellow Ships of Scale member Corsair from Homosassa, Florida saying there was one available on Ebay. I had the kit in hand in a couple of weeks and kept it in my den awaiting the return from our visit to Lisbon and visit to the Fragata D. Fernando II e Glória. Thanks Corsair!

We had a wonderful trip to Portugal and I took over 150 reference photos for my second build.

I also found that google maps has a great complete full walk through tour of the ship that I could use as a reference. Enjoy!


Let the modeling begin ....
View attachment 644599View attachment 644600View attachment 644601
I have a question about the accuracy of the Revell kit. I had heard that it was simply a re-boxing of the Zvesda L'Acheron. How does the Revell kit compare to the actual ship? I sincerely hope that it compares favorably.
 
Hi Bill, Since your question I’ve done a little bit of googling about this.
Indeed it appears that the Zvesda L'Acheron and D. Fernando II e Glória share a common history.
The more I looked into it though, it became apparent that D. Fernando II e Glória came out first and the Zvesda L'Acheron was a repackaging of the Portuguese frigate. The original tooling comes from the now defunct Portuguese company “Ocidental Replicas”. Originally released by Ocidental Replicas in the 1990s/2000s and later reboxed by Revell in 2010. The kit for the fictional Zvezda French Frigate L'Acheron was released later in 2015.

As for accuracy I’ll have to keep you posted, but as with model at a scale of 1:200 details will always suffer. The bluenose I built was at 1:75 which made it easier to build items to make the kit more realistic. A quick once over the parts and the plans does lead me to believe its been done pretty well though. I'll know more once I'm further along in the planning and building stages.

The kit has only the guns on the lower deck and has nothing is provided for the decks below. My plan is to scratch build these lower decks from a image I found on the web showing the deck plans. I’ve brought it into CAD and scaled it to match the model scale so I have something to build the decks over.

ecfd9bc8357bb61fc0c36c86b8cd19f7.jpg
 
Hi Bill, Since your question I’ve done a little bit of googling about this.
Indeed it appears that the Zvesda L'Acheron and D. Fernando II e Glória share a common history.
The more I looked into it though, it became apparent that D. Fernando II e Glória came out first and the Zvesda L'Acheron was a repackaging of the Portuguese frigate. The original tooling comes from the now defunct Portuguese company “Ocidental Replicas”. Originally released by Ocidental Replicas in the 1990s/2000s and later reboxed by Revell in 2010. The kit for the fictional Zvezda French Frigate L'Acheron was released later in 2015.

As for accuracy I’ll have to keep you posted, but as with model at a scale of 1:200 details will always suffer. The bluenose I built was at 1:75 which made it easier to build items to make the kit more realistic. A quick once over the parts and the plans does lead me to believe its been done pretty well though. I'll know more once I'm further along in the planning and building stages.

The kit has only the guns on the lower deck and has nothing is provided for the decks below. My plan is to scratch build these lower decks from a image I found on the web showing the deck plans. I’ve brought it into CAD and scaled it to match the model scale so I have something to build the decks over.

View attachment 645496
Thank you for the deck plans! I may have to do the same. I generally build at 1:96 or 1:100 but ships at 1:200 fit my available shelf space much better! That said, the relative scarcity of sailing ship kits means that almost any scale will have to do. I have yet to delve into 1:600 though.
 
As with my the schooner Bluenose build back in 2023 I decided to create my Frigate Dom Fernando II e Glória as close to realistic as my limited skills would allow. To recreate the ship as it was when I visited it. Well almost.

Upon my visit there were a couple of things that weren’t quite as I had hoped. I had done a fair bit of googling and collecting reference images of the restored Portuguese frigate and there were a couple of things that, while not disappointing, didn’t quite measure up to the experience I had enjoyed when I visited the Bluenose back in 2023.

Mainly, the Bluenose is a active sailing ship, you can actually go out with the crew for day sails and participate in synchronized maneuvers, hoisting and lowering sail. Or, if your between 19 and 30, even sign up as crew and work on the ship for the sailing season. What an experience that would be!

But the Frigate Dom Fernando II e Glória was restored as a museum piece. Back in 1998 in preparation for the World’s Fair in Lisbon Portugal Dom Fernando II e Glória was new, fully rigged and floated into Lisbon with much fan fair. Since then she has sat out in dry dock and despite continuous restoration and maintenance her exterior appears a little weathered. Her upper mast spars have been removed and currently feature a simplified or truncated masting configuration to reduce loads on the hull.

So the plan going forward is to create a model that captures her restored state as she was at Expo ’98. Complete with scratch built lower decks and flicker LED’s that simulate the lanterns that were used below deck back in her glory days. I do not plan on using the plastic sails the kit came with but hope to do furled sails similar to the model Ships of Scale member Dicas from Lisbon shared that sits in the Museu de Marinha. (Thanks Dicas!)

The bluenose took me just over 6 months but because this is a plastic kit I do not have all the planking and decking to complete. So I figure around the 3 month mark seems reasonable. Which puts me around Christmas, in and of itself is a busy time, but does allow me the holidays to dedicate to rigging and finishing touches.

That’s the plan anyways, time to start building! Keep you all posted.

2a23b5899a4d39a817c3f3f65f376d65.jpg
 
Hi, Hobbie Builder, I am Portuguese and I saw it all from the burning to the restoration and I visited the ship a few times.

For the history the name of the frigate comes from the names of D. Fernando II,prince consort of our queen D. Maria da Glória, or D.Maria II.

I have some photos aboard the ship when she had more fittings that she has now, I'll post them if I can find them.

Regards

JL
 
Hi, Hobbie Builder, I am Portuguese and I saw it all from the burning to the restoration and I visited the ship a few times.

For the history the name of the frigate comes from the names of D. Fernando II,prince consort of our queen D. Maria da Glória, or D.Maria II.

I have some photos aboard the ship when she had more fittings that she has now, I'll post them if I can find them.

Regards

JL
I will certainly follow those as well!
 
Back
Top