Alignment of ropes and polyester with a thermal applicator

[Winter]

There's not much to describe, as it's quite obvious. By using a heated thermal applicator on a stretched rope, the rope is straightened.

 

[Y.T.]

Thanks. Did you manage to straighten horses and stirrups? They are my major concern. I am so much frustrated with my polyester stirrups in particular that I am thinking to replace them with blackened copper wire.

Also what is your heater applicator initial purpose? I did not know they existed.

 

[Dubz Modelling World]

@Y.T. It's perfect for planking I'ts a rhinestone applicator.

 

[Winter]

Thanks. Did you manage to straighten horses and stirrups? They are my major concern. I am so much frustrated with my polyester stirrups in particular that I am thinking to replace them with blackened copper wire.

Also what is your heater applicator initial purpose? I did not know they existed.

Hot-melt rhinestones are decorative elements that imitate precious stones: they can be made of glass, crystal, or acrylic, faceted, and often coated with a metallic layer for added shine. The main difference is that hot-melt rhinestones have a hot-melt adhesive backing. To secure the rhinestone, the adhesive must be melted by heating, allowing it to adhere securely to the surface.

I bought a heat-applicator for bending hull planking strips. It's also used to speed up the adhesion of wood glue when planking the model's hull. It's an especially indispensable tool when assembling boats.

 

[Y.T.]

.

 

[Y.T.]

bought a heat-applicator for bending hull planking strips.

Did you manage to straighten horses and stirrups from your initial yard picture? These are the "walking" ropes and their vertical supports.

 

[Winter]

Did you manage to straighten horses and stirrups from your initial yard picture? These are the "walking" ropes and their vertical supports.

No problem, especially since these are stained ropes.

 

[Winter]

Did you manage to straighten horses and stirrups from your initial yard picture? These are the "walking" ropes and their vertical supports.

I also corrected the crooked steps of the stairs.