Gun port patterns

[danielsje]

I’m going plank below with the 1.5mm Limewood supplied with the kit but overlay the first couple of planks with some 0.5 m followed by some careful sanding to feather it all in.

Or plank to the wales and then use the thicker wales as the transition as opposed to trying to feather sand a transition…

 

[Robster]

Hello everyone. House renovation complete so back to the workbench. 1st planking almost completed. After planking the upper hull I cut the gunport pattern out of the plans and taped them to the hull. I then drew the gunports. As far as I can tell they are in the right place.