- Joined
- Dec 9, 2024
- Messages
- 1
- Points
- 0
I am building the Heller Victory plastic and wood. I need some advice for the rigging. Especially on the hullen.
Many greetings, Albert
Many greetings, Albert
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering. -
PRE-ORDER SHIPS IN SCALE TODAY!
The beloved Ships in Scale Magazine is back and charting a new course for 2026!
Discover new skills, new techniques, and new inspirations in every issue.
NOTE THAT OUR FIRST ISSUE WILL BE JAN/FEB 2026
Heller Victory
- Thread starter Albert Slager
- Start date
- Watchers 10
Welcome to the forum from NY
Welcome to the forums Albert.
Can you be more specific as do your needs with the rigging? There is a lot of it on the Victory.
You should start from the inside and work your way outward.
Use a highlighter and mark the ones on the plans as you install them.
Can you be more specific as do your needs with the rigging? There is a lot of it on the Victory.
You should start from the inside and work your way outward.
Use a highlighter and mark the ones on the plans as you install them.
also from my side a warm welcome here on board of our forum
Welcome aboard
Here are some ideas from amazon (however in the USA), but I am sure that you can still order from amazon
Welcome Albert to the forums and greetings from Texas! Magic Mike
- Joined
- Dec 14, 2021
- Messages
- 341
- Points
- 168
How far have you got with your build, Albert? This is a good place to maintain a build log, you will receive a lot of good advice from some very knowledgeable people.