Hoy, 1760

[Albert Mary]

Meanwhile I provided the cradle with a rawly built clamp to keep the stempost firm and perfectly upright. Realized it was a bit too loosen...

 

[Albert Mary]

Frame A lower profile now fairly matches the rabbet. The 1,5 mm thick plank (some 2'' in full scale) I used as a test fits well enough.

 

[Albert Mary]

Hi.the build can be interesting.I will watch carefully.

Thanks! I followed your own building with the greatest interest!

 

[NOVICHOK]

Hi.If you don't mind, I can give you some advice.when you build the sides, then use this piece of wood.

 

[Albert Mary]

Hi.If you don't mind, I can give you some advice.when you build the sides, then use this piece of wood.

View attachment 374665

Hi! Thank you. Any advice would be absolutely welcome. What was those debries for? Maybe they provide a sort of rib spacers?

 

[NOVICHOK]

Hi.here's a look at the assembly of our forumchanin.if you start this strip right after the upper bar, then you will not have this.Yaya showed this moment in his assembly.

 

[NOVICHOK]

Here's my option.I added a strip.

 

[Albert Mary]

Ah, ok. Understood, thanks!

 

[Albert Mary]

Oh boys, just run into this issue... .

 

[NOVICHOK]

Hi.it hurts.I conquered this moment with this tool.sharpened a suitable piece of metal.

 

[Albert Mary]

Victor at Dry Dock Models kindly offered to provide me with a spare board H. Lovely customer service!

 

[Albert Mary]

Ok, looks like first couple of timberheads got correct layout. Just scared i went wrong as I decided to ignore recommendation on how gluing together the two half-frames of any streamlined rib. I just inverted right with left parts in oder to get the laser marked surfaces on the opposte face of the assembled frame, avoiding the step (I was puzzle with for the ribs at the extreme bow and stern) between the two halves.

 

[Albert Mary]

Just delivered...

 

[Albert Mary]

...

 

[Albert Mary]

Delivered! Thank you Victor. Awsome Customer Service!

 

[Uwek]

I'm currently workin' at that guy... . The kit is a bit simple, but so precise. Assembling the keel just reminds me a complicate Lego kit.
Bashing mode already on: I carved the rabbet in Antscherl's fashion...

View attachment 372426



View attachment 372428

View attachment 372429

HALLO @albertmary
we wish you all the BEST and a HAPPY BIRTHDAY

Enjoy your special day

 

[shota70]

HAPPY BIRTHDAY albertmary

 

[zoly99sask]

Happy birthday!!

 

[Jimsky]

Happy Birthday!

 

[Albert Mary]

Hey there, I thank you all, mates!