I saw that

[whiskers]

Gentlemen: for the Proxxon FET table saw can someone recommend a fine toothed blade from an alternate company (as in cheaper)?
Thanks

John

 

[Steef66]

2.69US $ 26% OFF|Newone 10Mm Nitride Coating Hss Mini Cirkelzaagblad Hout/Metal Cutter 60T/80T Tct hout Slijpschijf Zaagblad|Power Tool Accessories| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

nl.aliexpress.com

 

[Steef66]

I use these bore 10mm and 85 mm total. They work fine! And for the price of 1 proxxon you got the whole set of Newone. There are youtube movies where you can see a test

 

[whiskers]

I use these bore 10mm and 85 mm total. They work fine! And for the price of 1 proxxon you got the whole set of Newone. There are youtube movies where you can see a test

Thanks so much. Yes I checked the price of the Proxxon blade and it was fairly steep before shipping and taxes etc.

 

[Steef66]

explanation of a saw blade for Proxxon

Here you see you Proxxon saw blade.
85x0,5x10 mm 80Z is the type on the saw.
this means:
85 is your outside diameter.
0,5 is the thickness of the blade (cut it makes in the wood)
10 is the diameter of the axle where the blade is attached in your saw.
everything in mm. millimetre.
and 80Z is the amount of tooth on the blade.

For an Proxxon FET you need a saw blade with a bore of 10 (the inside diameter of the hole)
And an outside diameter of 50 mm. to 88 mm.

This link https://nl.aliexpress.com/item/4000071259411.html?spm=2114.13010708.0.0.3a994c4dvs2y98
is where I ordered my saw blades too.

I ordered those 5 saw blades.