Planset review LA JACINTHE - Goêlette / Schooner – 1823 by Jean Boudriot

Uwek

Administrator
Staff member
Administrator
Forum Moderator
Joined
Dec 25, 2017
Messages
30,718
Points
1,238

Location
Vienna, Austria
Planset Review:
LA JACINTHE
Goêlette / Schooner – 1823

by Jean Boudriot

Schooner By Engineer de la Morandière 1823 - HISTORY OF THE SCHOONER IN THE FRENCH NAVY.

IMG-45001a.jpg
(I have the english and the french version)

IMG-45041a.jpg IMG-45021a.jpg

Available directly from ancre in English, French, Italian or German language

https://ancre.fr/en/monograph/52-monographie-de-la-jacinthe-goelette-1823.html#/langue-anglais


Unbenannt1.JPG

monographie-de-la-jacinthe-goelette-1823.jpg

Unbenannt2.JPG

monographie-de-la-jacinthe-goelette-1823 (5).jpg monographie-de-la-jacinthe-goelette-1823 (1).jpg monographie-de-la-jacinthe-goelette-1823 (2).jpg

monographie-de-la-jacinthe-goelette-1823 (3).jpg monographie-de-la-jacinthe-goelette-1823 (6).jpg Unbenannt.JPG


SYNOPSIS:

This monograph is intended for those who want to practice ship's model building but do not have extensive experience. A basic model building method is included for them in this monograph.

With a little care and skill, the method leads to the construction of a model from prime quality material, since wood will be exposed on a planked hull. This monograph must be considered as an initiation to "the art of model building".
Confirmed ship's model builders will also be interested in the elegance of this small schooner, created by its fine underwater hull and its light rigging. They should find the lines of Jacinthe quite appealing.

Those readers who are more specifically interested in naval archeology will find in this monograph a necessary addition to previous studies, as it deals with brigs, cutters, and luggers. These constructions complement the building of schooners. The historical and technical study of this type of ship is given with an extended iconography.

IMG-45031.jpg


Size of the Model:

Unbenannt4.JPG


TEXT AND ICONOGRAPHY,
FORMAT 24x31cm INCLUDING :

- History
- Remarks on the avisos
- Schooners in the French navy
- General points on schooner rigging
- Various schooner designs
- Notes on schooner rigging
- Presentation of La Jacinthe with a study of the 12 French carronade
- Various representations of schooners (P. Ozanne - F. Roux - J.J. Baugean)
- Monograph
- Commentaries on the plates
- Rigging rules
- Photos of the Topaze model's hull


Set of 5 plates,
1:48 scale

1) Defining the hull, drawing out the waterlines, drawing the frames in order to make the model and draws for the stem and the stern with lower counter and stern.
2) Disposition of the planked hull, front and back views. Longitudinal section of the deck. Plan of planked deck and upper works.
3) Half plan of the deck for bulwark making. Cross sections.
Drawings of fittings, bits, partners etc.
4) Spars, guns, anchors, boat etc. Representation of square sails ( topsail and topgallant) and their foremast rigging.
5) La Jacinthe sailing.

Two sets of plans are provided. One is incorporated into the text, with plates 1 to 4 at 1:48 scale, plate 5 at 1:100 scale. The other set is independent with five plates at 1:48 scale.

Building method
- Foreword
- Suggested method
- Photos illustrating the method
- Photos of a model in progress.

Photos du modèle de Bruno Orsel (Photographe : Bruno Orsel et Olivier Gatine)
La Topaze, sister ship de la Jacinthe.


Look Inside the Book:

IMG-45051a.jpg IMG-45061a.jpg

IMG-45071a.jpg IMG-45081a.jpg

IMG-45091a.jpg IMG-45101a.jpg

IMG-45111a.jpg

IMG-45111a.jpg IMG-45121a.jpg

IMG-45131a.jpg
 

Attachments

  • LA_JACINTHE_engl (1).pdf
    779.3 KB · Views: 41
  • lajacinthe.pdf
    923.1 KB · Views: 44
Back
Top