Master Korabel Cannon jolle 1801

[YiFan]

I haven't been to the forum for a long time. But recently I tried a kit from Russia and I feel very good. Just share it with everyone.

A few months ago, I saw a video about this jolle on youtube, so curiosity drove me to spend a lot of effort to buy this kit from Russia.I bought three kits, in addition to cannon jolle, there is also a steam wheel boat and an Imperial steam boat.



this time we look at the parts of cannon jolle. first the wood parts：

The hull structure was made of MDF board



and these two pieces Should be pear



and this piece I can't see what the material was. maybe teak？It doesn't matter, just pretty good.



two Photo Etched sheet



Gun barrel




The following is the process diagram I made.

If there are any doubts, I will reply one by one.

 

[YiFan]

 

[Uwek]

This is a very interesting kit and looks like very well prepared.
I like the appearance of the deckplanking very much, and also the laser cut hull planking is fitting very good.
I am looking forward to see more of this built

 

[Jimsky]

Looks like you are off the good start. I will watch as you progress.

 

[Uwek]

I haven't been to the forum for a long time. But recently I tried a kit from Russia and I feel very good. Just share it with everyone.

A few months ago, I saw a video about this jolle on youtube, so curiosity drove me to spend a lot of effort to buy this kit from Russia.I bought three kits, in addition to cannon jolle, there is also a steam wheel boat and an Imperial steam boat.
View attachment 120390


this time we look at the parts of cannon jolle. first the wood parts：

The hull structure was made of MDF board
View attachment 120393


and these two pieces Should be pear

View attachment 120394View attachment 120395

and this piece I can't see what the material was. maybe teak？It doesn't matter, just pretty good.

View attachment 120396View attachment 120397View attachment 120398

two Photo Etched sheet

View attachment 120399View attachment 120400

Gun barrel
View attachment 120392



The following is the process diagram I made.

If there are any doubts, I will reply one by one.

View attachment 120401View attachment 120403View attachment 120406View attachment 120407View attachment 120402View attachment 120408View attachment 120404View attachment 120405View attachment 120409View attachment 120410View attachment 120411View attachment 120412View attachment 120413View attachment 120414

Hallo @YiFan ,
we wish you all the BEST and a HAPPY BIRTHDAY

 

[Uwek]

I haven't been to the forum for a long time. But recently I tried a kit from Russia and I feel very good. Just share it with everyone.

A few months ago, I saw a video about this jolle on youtube, so curiosity drove me to spend a lot of effort to buy this kit from Russia.I bought three kits, in addition to cannon jolle, there is also a steam wheel boat and an Imperial steam boat.
View attachment 120390


this time we look at the parts of cannon jolle. first the wood parts：

The hull structure was made of MDF board
View attachment 120393


and these two pieces Should be pear

View attachment 120394View attachment 120395

and this piece I can't see what the material was. maybe teak？It doesn't matter, just pretty good.

View attachment 120396View attachment 120397View attachment 120398

two Photo Etched sheet

View attachment 120399View attachment 120400

Gun barrel
View attachment 120392



The following is the process diagram I made.

If there are any doubts, I will reply one by one.

View attachment 120401View attachment 120403View attachment 120406View attachment 120407View attachment 120402View attachment 120408View attachment 120404View attachment 120405View attachment 120409View attachment 120410View attachment 120411View attachment 120412View attachment 120413View attachment 120414

Hallo @YiFan
we wish you all the BEST and a HAPPY BIRTHDAY

How is your work on the boat going? Any updates for us?