Planset Review: "LE ROCHEFORT - 1787" Harbour Supply Vessel / Yacht - 1:36 - by Gerard Delacroix

Uwek

Admin
Staff member
Administrative
Blandford Group Build
Joined
Dec 25, 2017
Messages
8,176
Points
728

Location
Vienna, Austria
Planset Review:
LE ROCHEFORT - 1787
Harbour Supply Vessel / Yacht
- 1:36

by Gerard Delacroix

IMG_13012.jpg elev_voile.jpg

Monographie is available directly from Gerard Delacroix via
http://gerard.delacroix.pagesperso-orange.fr/rochefort/plaquette-e.htm

Price exclusive postage is 66,- Euro

There are different languages available, original written in french, but you can get with the monographie a word-file for printing in english, italian or spanish launguage.


Synopsis:

Created by Colbert in 1666, the city of Rochefort is unusually located since its harbor-arsenal, built on the Charente river, is about twelve miles away from the sea following the river. Although this exceptional distance from the sea protected the harbor from enemy fleets for centuries it caused problems, however, that were unsuspected at the time of its creation. Unfortunately, the insufficient water depth of the Charente river in the 17th and 18th centuries made it impossible for large vessels to go down and up the river without first unloading their equipment, arms and ammunition. The Navy thus created a flotilla to assist and equip the vessels that remained anchored in Aix’s roadstead while waiting to be fitted out or laid up.

This flotilla consisted of several kinds of small vessels: lighters, yachts, transport-ships or brigs from the harbor. We chose to illustrate these ships with yachts, inherited from the Dutch workers who came to drain the swamps of the Charente during the 17th century.

This small elegant craft is of a simple construction with elementary rigging, since only one mast and three sails equip its hull. The book includes a booklet and a set of 16 plates of drawings. In the booklet, a chapter describes the creation of Rochefort and the reasons that led to the constitution of the flotilla. A presentation of the lighters and yachts, and more specifically the Le Rochefort yacht, complete this article. The construction and laying out of the Le Rochefort are detailed in instructions abundantly illustrated with 3D figures, followed by a commentary on the plates including a precise description of the rigging.

IMG_12701.JPG
I made a photo of the 1:36 model of the "Le ROCHEFORT Yacht de port 1787" built by Jean-Maurice Darville which was exhibited in the Congres International de Modelisme Naval in Rochefort. Model built based on the drawings of Gerard. More photos of this model I will post in the following post.


Contents:

Booklet 24 x31 cm and 16 plates of drawing collect in a folder
illustrate with an aquarelle by Jean Bellis.
The Booklet with 96 pages:
- The Rochefort dockyard and her featuring
- Yachts and lighters of the harbour
- Le Rochefort yacht and its construction
- Comments of the plates
- Scantlings, painting and iron work
- Rigging

16 plates in 1/36 scale :
1 – Schematic plan of the hull, lines and sections
2 – Parts of axial framework
3 – Frames (1)
4 – Frames (2) and hull framing
5 – Beakhead and stem
6 – Longitudinal section of timber
7 – Hold building
8 – Deck building
9 – Building forecastle and quaterdeck
10 – Longitudinal section and masting
11 – Cross sections
12 – Top view of the hull
13 – Longitudinal layout, views of the bow and stern
14 – Equipment and fitting
15 – Sails, belaying points and blocks
16 – The ship under sails



Resumee:

This planset is absolute complete, all information about the vessel itself and the construction is given.
The plans are absolute complete and show every detail necessary to build a wonderful smaller vessel in scratch.
Based on the very reasonable price and the completeness of the drawings it is a very good POF-project for the beginner and / or intermediate scratch modeler.

This planset is HIGHLY RECOMMENDED


The Look Inside of the booklet

IMG_13011.jpg

IMG_13021.jpg IMG_13031.jpg

IMG_13041.jpg IMG_13051.jpg

IMG_13061.jpg IMG_13071.jpg

The detailed info describing the drawings
IMG_13081.jpg IMG_13091.jpg

IMG_13101.jpg IMG_13121.jpg

IMG_13131.jpg IMG_13141.jpg

IMG_13151.jpg

The Look Inside photos of the drawings which are part of the planset you can find in the following post ...... to be continued also with photos of a completed model
 

Uwek

Admin
Staff member
Administrative
Blandford Group Build
Joined
Dec 25, 2017
Messages
8,176
Points
728

Location
Vienna, Austria
Part 2 of Planset Review:
LE ROCHEFORT - 1787
Harbour Supply Vessel / Yacht
- 1:36

by Gerard Delacroix

The Look Inside of the 16 plates with scale 1:36 drawings

IMG_13161.jpg IMG_13171.jpg

IMG_13181.jpg

IMG_13181.jpg IMG_13191.jpg

IMG_13201.jpg IMG_13211.jpg

IMG_13221.jpg

and as mentioned before the model of the Le ROCHEFORT built by Jean-Maurice Darville shown in Rochefort two weeks ago.

IMG_12691.JPG IMG_12701.JPG

IMG_12711.JPG IMG_12721.JPG

IMG_12731.JPG IMG_12741.JPG

IMG_12751.JPG IMG_12761.JPG

IMG_12771.JPG IMG_12781.JPG

As mentioned in the post before - Highly recommended planset for a very reasonable price.
Well complete document and drawing set -> a very good basis for a POF scratch built

Many Thanks for your interest.....
 

donfarr

Well-Known Member
Blandford Group Build
Joined
Jan 9, 2013
Messages
1,489
Points
383

Uwe, What is a word file, as most of you know I am a compte computer illeteraite. Don
 

Uwek

Admin
Staff member
Administrative
Blandford Group Build
Joined
Dec 25, 2017
Messages
8,176
Points
728

Location
Vienna, Austria
Uwe, What is a word file, as most of you know I am a compte computer illeteraite. Don
A Text-file written in the software Microsoft word. This software is part of Microsoft office, so usually everybody can make his own printout at home....
These files are ending with „.doc“
 

donfarr

Well-Known Member
Blandford Group Build
Joined
Jan 9, 2013
Messages
1,489
Points
383

Thanks Uwe, time to get my SON-IN-LAW. Don
 

DocBlake

Well-Known Member
Blandford Group Build
Joined
Jan 24, 2015
Messages
1,070
Points
433

Location
Pewaukee, Wisconsin
Uwe: Do you know or can you find out if it is possible to get a copy of the plans as a .pdf? This would allow accurate plans without the folds etc. It would also allow copying and cutting the plans up and using them on the frames as templates for beveling. It would be a huge help! No copyright infringement is planned here; just a more convenient form for the plans to be in.
 

donfarr

Well-Known Member
Blandford Group Build
Joined
Jan 9, 2013
Messages
1,489
Points
383

Hi Doc, I hope you start a building log Doc and do you mind if I ask you questions on the open forum as I stated before will be ready in about 2 to 3 weeks, getting copies of the plans printed this weekend, am going to order materials from dave stevens starting with the frames. Don
 

zoly99sask

Admin
Staff member
Administrative
Blandford Group Build
Joined
Apr 13, 2015
Messages
3,445
Points
578

Location
Saskatoon,Canada
Uwe: Do you know or can you find out if it is possible to get a copy of the plans as a .pdf? This would allow accurate plans without the folds etc. It would also allow copying and cutting the plans up and using them on the frames as templates for beveling. It would be a huge help! No copyright infringement is planned here; just a more convenient form for the plans to be in.
Hello Dave,@G. DELACROIX is a member on Sos he might can get you a Pdf version.
 
Top