Brada'nın kullanılmaması gereken dügüm türü SEZING google a bu ismin yazıldığını bu bagın nasıl yapılacagını ögren bilirisin
Last edited:
-
Win a Free Custom Engraved Brass Coin!!!
As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.
USS Constitution 1:70 Scratch
- Thread starter mtbediz1
- Start date
- Watchers 68
-
- Tags
- constitution
Brada'nın kullanılmaması gereken dügüm türü SEZING google a bu ismin yazıldığını bu bagın nasıl yapılacagını ögren bilirisin
- Joined
- Jan 26, 2017
- Messages
- 1,296
- Points
- 493
I started on the mainmast and started adding the shroud lines that I made. I started on the forward starboard side and worked side to side adding a pair at a time.
To ensure equal spacing between the upper and lower deadeyes, I use a jig. I secure the upper deadeyes onto a wooden board with a pair of nails set at the same height, and then I attach the shrouds to the deadeyes. After that, I remove the deadeyes from the jig and complete the remaining three knots outside. Once the knots are finished, I pass the shroud back over the mast and connect the upper and lower deadeyes using the lanyard.
To ensure equal spacing between the upper and lower deadeyes, I use a jig. I secure the upper deadeyes onto a wooden board with a pair of nails set at the same height, and then I attach the shrouds to the deadeyes. After that, I remove the deadeyes from the jig and complete the remaining three knots outside. Once the knots are finished, I pass the shroud back over the mast and connect the upper and lower deadeyes using the lanyard.
It is always a joy to see your work, Mustafa!