H.M.S Enterprize 1:48 CAF Models

Indeed Uwek, a huge sanding job follows and quoting a previous post from you
"" ..my experience with the Salamandre -> you can trust by 99% the sanding marks, but leave a small amount of „meat“ for the final sanding when all frames are installed"" , this is what i will have in mind.
The frames bellow
20190917_095813.jpg20190917_095756.jpg20190917_101506.jpg
 
Last edited:
Next parts for the stern construction are these "alien" parts, i guess they are either 3D printed or resin molded, anyway i guess they could have made them in another colour at least.


View attachment 69817View attachment 69818

Thank you and have a Happy New Year !

Not an update, but just in case there are any other persons building this model you may
find this interesting, i found this parts, wich i quote above from a previous post, these anoying green(ish) parts from the stern are now suplied in wood from what i understood ( 1$ ), not sure if got that right but they are available.
In my opinion they should have been supllied with the kit in the 1st place, but it is nice to see they have upgraded this.
20191031_090407.png20191031_090430.png
 

Attachments

  • 20191031_090407.png
    20191031_090407.png
    754 KB · Views: 3
Last edited:
Not an update, but just in case there are any other persons building this model you may fiView attachment 118101nd this interesting, i found this parts, wich i quote above from a previous post, these anoying green(ish) parts from the stern are now suplied in wood from what i understood ( 1$ ), not sure if got that right but they are available.
In my opinion they should have been supllied with the kit in the 1st place, but it is nice to see they have upgraded this.View attachment 118105
It was announced a short time ago by CAF in our special area for "New kits and Development" - Did you order them already?

 
Hallo @Brito_686 ,
we wish you all the BEST and a HAPPY BIRTHDAY
Birthday-Cake
How is your work on the Enterprize going?
Hi Uwek, all my modelling is on hold as i am waiting for the completion of the construction of my new house, all the tools and models are stored in boxes and i do not dare to take all out. I Will just have to wait untill i have new proper workspace to work again. Untill then i have to settle with just watching.
Thank you and Nice modelling!
 
Hi thrusty mates!
As promised i will start my HMS Enterprize build log.
For me this is a premier, as i have never built a POF model like this.. i have wondered trough forums and posts of similar builds and always wanted to have such a good looking model, never knowing if was capable of such thing... but i had to give it a try. So i have collected the "coins" and jumped on this quest. This one really got me , i hope you enjoy this build as much as i do ! Please leave your comments and tips, let´s get to work...
Hallo @Brito_686
we wish you all the BEST and a HAPPY BIRTHDAY
Birthday-Cake
 
Hi thrusty mates!
As promised i will start my HMS Enterprize build log.
For me this is a premier, as i have never built a POF model like this.. i have wondered trough forums and posts of similar builds and always wanted to have such a good looking model, never knowing if was capable of such thing... but i had to give it a try. So i have collected the "coins" and jumped on this quest. This one really got me , i hope you enjoy this build as much as i do ! Please leave your comments and tips, let´s get to work...
Hallo @Brito_686
we wish you all the BEST and a HAPPY BIRTHDAY
Birthday-Cake
 
Back
Top