Colin Archer RS 1 anno 1893

Uwek

Admin
Staff member
Administrative
Moderator
Blandford Group Build
Joined
Dec 25, 2017
Messages
10,745
Points
828

Location
Vienna, Austria
This a very interesting project - very good work and many thanks for sharing with us your way of solving these technical problems
 

Woodcarving Reidar

Well-Known Member
Joined
Jul 8, 2019
Messages
41
Points
68

Location
Norway
I was lucky enough to stay with someone in the family today. Used 5 angle grinder blades 125 mm
had to buy with a small plane grinder also to smooth out the balls that you get with only angle grinder. Unfortunately, the motor on the plane grinder is a little too small, so I have to be patient. will continue to cut on the steel keel tomorrow
7AC1B11A-BC43-4A41-9E4D-FCF5F63438B5.jpegimage.jpg
New weight is 7,5 kg
 

Woodcarving Reidar

Well-Known Member
Joined
Jul 8, 2019
Messages
41
Points
68

Location
Norway
then I made a sledge in which the metal keel was placed. it helps when drilling holes for M4 mm bolts. it went with 12 pcs. I also finished the template on top so I have something to cut the keel after. also had to notice the underside since it is narrower there
61628CBC-44A4-4ABA-A3F6-C11D7AA32CDA.jpeg4960CEB9-28FC-47DF-882E-A1056472C62D.jpeg
That plate on top is only temporary as a template
1ED121C4-D481-44F4-90B7-634016E02C24.jpeg
Top
B9EA01A9-C39D-4FD0-975C-9968873C4AFD.jpeg
underneath
 
Last edited:

Woodcarving Reidar

Well-Known Member
Joined
Jul 8, 2019
Messages
41
Points
68

Location
Norway
new update.
has left a bit. so now the keel weighs 5.1 kg.
have some finishing touches to make it look the same on both sides. I've noticed how many mm I have to grind down. must also make a notch on the end of the keel. I don't think more will be done before January 2, 2020
image.jpg
 
Last edited:

Woodcarving Reidar

Well-Known Member
Joined
Jul 8, 2019
Messages
41
Points
68

Location
Norway
today was that I got the milling of slots for frames and preparation of the stem to cut it out tomorrow in 12 mm oak
unfortunately burned I a Dremel 4000, during milling of the tracks to the ribs, so I had to use a real router. bought a new Dremel today on offer.
image.jpg
 
Top