Dry-Dock Models & Parts Dry-Dock Models & Parts Store News

So I'm scrolling down thinking, "Hmmm, not a bad model, not outstanding, but pretty good, detail nice, etc., etc." And then I got to the coin and the hand. Holy moly! I missed the 1:160 scale part of the description. Very nice indeed! I'm impressed.
 
Dry-Dock Models & Parts said:
Hello guys

New product in the Dry Dock

Hms Enterprize 1774 Stern Section 1:160.comes in Pearwood and Boxwood version with Boxwood decorations
drydockmodelsandparts.com

Unicorn Models

Dry - Dock Models & Parts is providing high quality ship model fittings and parts
drydockmodelsandparts.com drydockmodelsandparts.com

View attachment 511559

View attachment 511560

View attachment 511561

View attachment 511562

View attachment 511563

View attachment 511564

View attachment 511565

View attachment 511566

View attachment 511567

View attachment 511568

View attachment 511569

View attachment 511570

View attachment 511571

View attachment 511572

View attachment 511573

View attachment 511574

View attachment 511575

View attachment 511576

View attachment 511577

View attachment 511578

View attachment 511579
Click to expand...
Dry-Dock Models & Parts said:
The kit content

View attachment 511585

View attachment 511586

View attachment 511587

View attachment 511588

View attachment 511589

View attachment 511590

View attachment 511591

View attachment 511592

View attachment 511593

View attachment 511594

View attachment 511595

View attachment 511596
Click to expand...
That’s what I was waiting for! Ordered the boxwood version just a moment ago. :)
A real challenge besides the ‘Evergreen’ Balder. Even better then the 1:128 Druid …….. :rolleyes: For sure you will see it in a build-log, but when that will be ……. ;)
Regards, Peter
 
Last edited:
Hello guys!

Oseberg Ver 3 kit is back in stock
drydockmodelsandparts.com

Drakkar

Lenght 860mm Width 430mm Height 580mm The “Ships of Pavel Nikitin” presents a new version of the legendary Viking ship “Oseberg”. The differences from the previous version are so significant that it is essentially a completely new ship. There are lot of changes: the frame became almost like...
drydockmodelsandparts.com drydockmodelsandparts.com
1743898122388.png
 
Dry-Dock Models & Parts said:
Hms Enterprize 1774 Stern Section 1:160 Instruction Manual

Enterprise 1774 1:160 Stern Section Instruction Manual.pdf

drive.google.com drive.google.com
Click to expand...
Thanks for posting, Zoly. Also this is a clever designed kit from @Unicorn models. Now it’s buzzing in my head for the next days ….. ;) I foresee a lot of extra preparations and detailing. Luckily there is now the ‘Enterprize1774 Group Build’ in 1:48 to have a look around there from time to time.:)
Regards, Peter
 
Last edited:
Peter Voogt said:
That’s what I was waiting for! Ordered the boxwood version just a moment ago. :)
A real challenge besides the ‘Evergreen’ Balder. Even better then the 1:128 Druid …….. :rolleyes: For sure you will see it in a build-log, but when that will be ……. ;)
Regards, Peter
Click to expand...
This morgen FedEx delivered the Enterprise 1:160 from @Unicorn models. Included the Boxwood Decoration.
When presenting the kit and the model shown in the photos, the additional decorations were not shown.
001 Decorations.jpg
The ruler below is not very visible. Indication: the sheet is 110x77 mm. The letters of 'ENTERPRIZE are 2 mm high and razor sharp. I am impressed by the details! Much better than the laser engraved standerd parts. When I started with the build I will show the difference side by side.
Thanks Zoly @zoly99sask / @Dry-Dock Models & Parts for this quick delivery.
Regards, Peter
 
Last edited:
Peter Voogt said:
This morgen FedEx delivered the Enterprise 1:160 from @Unicorn models. Included the Boxwood Decoration.
When presenting the kit and the model shown in the photos, the additional decorations were not shown.
View attachment 512910
The ruler below is not very visible. Indication: the sheet is 110x77 mm. The letters of 'ENTERPRIZE are 2 mm high and razor sharp. I am impressed by the details! Much better than the laser engraved standerd parts. When I started with the build I will show the difference side by side.
Thanks Zoly @zoly99sask for this quick delivery.
Regards, Peter
Click to expand...

Ok, that's waaaay better than the printed ones from the photos above. I'm liking this kit more and more!
 
You must log in or register to reply here.
Back
Top