• SUBSCRIBE TO SHIPS IN SCALE TODAY!

    The beloved Ships in Scale Magazine is back and charting a new course for 2026!
    Discover new skills, new techniques, and new inspirations in every issue.

    NOTE THAT OUR NEXT ISSUE WILL BE July/August 2026
  • Win a Free Custom Engraved Brass Coin!!!
    As a way to introduce our brass coins to the community, we will raffle off a free coin during the month of August. Follow link ABOVE for instructions for entering.

Fair American 1:48 by Model Expo

Namabiiru said:
Anyone know a good source for 2mm blocks? Syren seems to have stopped selling ropes and blocks, and Dockrard’s smallest blocks are 2.5mm.
Click to expand...
My hat is off to you Nama, 2mm blocks are about the size of small birdseed. I'll have to deal with them that size too before long. Like Kurt said try Dry-Dock Models.
Actually 2.5mm is the smallest I have ever worked with.
 
Last edited:
Namabiiru said:
Thank you, Chuck. One would think from the inconsistency of my first few hooks that I was doing it jig-less, but I am actually using a jig. It still took a while to work out a system, but now they are coming out quite consistent, with only about one in 15 going in the trash bin.

The jig is simply a short length of guitar string (very stiff, but very thin) and a 0.5mm drill bit inserted parallel to one another in a piece of acrylic, with just enough space between them to fit the brass wire I am using for the hooks.
Click to expand...
Namabiiiru! I wish I had the skill and patience to set up a jig! I only asked because I make mine one-at-a-time ROTF True story. And I thought your's looked good!

Blessings.
Chuck
 
DARIVS ARCHITECTVS said:
I buy them from Zoly at Dry-Dock Models & Parts. I use their 1.5mm single and double sheave blocks for gun tackles.
Click to expand...
The smallest I saw was 2.5mm, but I’ll take another look—maybe I wasn’t looking in the right place.
Daniel20 said:
My hat is off to you Nama, 2mm blocks are about the size of small birdseed. I'll have to deal with them that size too before long. Like Kurt said try Dry-Dock Models.
Actually 2.5mm is the smallest I have ever worked with.
Click to expand...
Thanks, Daniel! It was Chuck that inspired me to give it a try, not to mention gifting me with some (I assume) surplus blocks.
The Gavel said:
Namabiiiru! I wish I had the skill and patience to set up a jig! I only asked because I make mine one-at-a-time ROTF True story. And I thought your's looked good!

Blessings.
Chuck
Click to expand...
Necessity being the mother of invention, I needed jig because I had no tools small enough to attempt it by hand. As far as patience, the jig is a huge time-saver since I can knock out about 2 hooks per minute with few wasted attempts.
The Gavel said:
I was just on Dry-Dock (ran out of 3mm ebony deadeyes :eek:) and they have blocks down to 1.5 single sheave.

Blessings.
Chuck
Click to expand...
I’ll take another look. Old eyes may have missed them.
 
DARIVS ARCHITECTVS said:
I buy them from Zoly at Dry-Dock Models & Parts. I use their 1.5mm single and double sheave blocks for gun tackles.
Click to expand...
I see where I went wrong: DDM only has pearwood blocks down to 2.5mm. Boxwood blocks, listed separately, get as small as 1.5mm.

Need to think about how I want to resolve this dilemma.
 
Namabiiru said:
I see where I went wrong: DDM only has pearwood blocks down to 2.5mm. Boxwood blocks, listed separately, get as small as 1.5mm.

Need to think about how I want to resolve this dilemma.
Click to expand...
Boxwood has such a tight grain that it will not take stain easily, so matching the color of the pearwood blocks may require you to paint them. If you do paint them, open the sheave holes with a micro drill bit so you can get the line to pass through the block. Harden about 12mm of the end of the line with some CA to so the line itself becomes a needle. I remove excess CA from the line by running the end between my pinched thumb and fourfinger. The line will form a thin, hard needle but them you have to get the glue off your fingers. It's worth it though, because fighting a the fraying end of a line to get it to go through a tiny block is very frustrating, and you can't use a wire threading tool on the smallest of blocks. If you try, you will split the block in twain. <-- I get to use this obsolete, fancy word for the first time, showing my age. Don't hate me. :D
 
You must log in or register to reply here.
Back
Top