Rigging elements. 
Friech Boeir Yacht "SPERWER" by Kortes -1:30 scale [COMPLETED BUILD]
- Thread starter Kortes
- Start date
- Watchers 28
-
- Tags
- completed build
Voorstag. 
Test assembling.
Macro-filming. As usually showed some defects, which will be eliminated before the final assembling.
Macro-filming. As usually showed some defects, which will be eliminated before the final assembling.
Absolutely stunning Alexandr
Kind Regards
Nigel
Kind Regards
Nigel
A master in metal.
I fully underline the words from Maarten,
you demonstrate with your rigging works of the blocks, hooks, clamps, rings etc what is possible in this scale of 1:30 - "master of metal"
Thank you , my dear colleagues for such a high evaluation of my work.
My best regards.
My best regards.
I have finished working in the sails
. I made a fore sail and a head sail.
. I made a fore sail and a head sail.
Have made the blocks . I still have to cover the riggings and finishing setting the ropes .
Very good work on the sails and the sail-rigging with small blocks etc. - amazing good appearance !
Did you buy these small wooden "balls" shown in the first photo of your last post? or did you made them by yourself - would be interesting!
Did you buy these small wooden "balls" shown in the first photo of your last post? or did you made them by yourself - would be interesting!
| I have made the parrel - trusses by myself. If anyone would find it interesting. During the working process I have tried several modes of making parrel trucks. Taking into consideration the size of the elements I found that the following mode was the best. I have grinded out a template, in my case D = 2,3 and 2,1 mm , I cut it in required sizes. Then I have drilled the holes (I haven't spent much time on the hands free tool, made it out of the things I had on hand, the mode is the same as when I drilled the holes in dead-eyes).     |
Next, with a little tightness, we stick a workpiece on a toothpick, which is clamped in a cartridge, and process with a sandpaper, on one and then the other side to the desired condition. With a little practice the elements are practically of the same size.
My best regards
My best regards
Sir anything you do is interesting. I have learned much from you, thank you.
Hi Alex, fantastic work.
Great ! - Many thanks for the detailed description of the method - a real good tutorial of how to make it
Greeting, dear colleagues,
i have made a parrel truck, installed a mainsail, and arranged mast balls on the deck.
i have made a parrel truck, installed a mainsail, and arranged mast balls on the deck.
Greetings, my dear colleagues.
I have finished rigging installation.
A few final photos.
I have finished rigging installation.
A few final photos.
In daylight. 
