Hallo Alexander,Greetings, dear Uve, I started working on a new project, I'll try to build a brig. For the moment I'm working on the hull. I dont have much to show right now, I'll make some more and post on the work accomplished .
My best regards, Alexander .
My old brain is confused by what you talk about as a plastic bag. Looking at what you are cutting it looks more like a report cover by how flat it appears to be. I think that the caulking width/thickness depends upon the scale of the model. Thanks for your clarification. Your work looks very well done and precise. Good job. PT-2I used plastic film for calking. I used this method when i was building "Carolina". All that one needs for this can be found in any stationary shop.
Plastic bag for paper (they can be found in different colors and thickness) and two sides adhesive duct tape. I
use the balck side of the plastic bag. I put the duct tape on plastic fim and cut it in stripes according to the thickness of the batten,
it can be made with a small margin, then I separate
protective paper from the strip and stick on the end of the batten, the allowances are cut off with the knife, - it's cutting off nicely.
Here are several photos, maybe they can be of use to somebody. If you have any questions - it would be my pleasure to help.
View attachment 66202View attachment 66203View attachment 66204View attachment 66205View attachment 66206View attachment 66207